We never sell your data to third parties
McGill MCFRE 30 SB CAMROL metric crowned eccentric cam follower, 30 mm roller diameter, eccentric stud construction, LUBRI-DISC seal, hex hole drive. Built from 52100 bearing steel with black oxide finish. Used in cam mechanisms and packaging machinery where radial position adjustment is required.
MODEL MCFRE 30 SB
Contact supplier for technical support on: 800-626-2120
$170.90 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ability to Relubricate
Yes
Dynamic Load Rating (N)
8240
Dynamic Track Roller Load Rating (N)
6860
Hex Socket (mm)
6
Limiting Speed
9600
Material
Bearing Steel, Black Oxide Finish
Minimum Thread Length (in)
14
Overall Length (mm)
40
Platform
CAMROL
Roller Width (mm)
14
Rolling Element
Needle Roller - Caged
Series
Metric CAMROL
Static Load Rating
8050
Stud Length (mm)
25
Stud Type
Standard Stud with Eccentric Bushing
Tolerance Class
P0 Equivalent
Width
1.37
Regal Beloit Mcgill&Reg; MCFRE 30 SB
UPC: 726166019181 | UNSPSC: 26101708 | GTIN:
Bearings > Cam Follower & Yoke Rollers > Crowned/Flat Follower & Track Runners
McGill CAMROL Cam Follower, Cylindrical OD, Series: MCFRE, 30 mm Roller Diameter, 14 mm Roller Width, 12 mm Stud Diameter, 25 mm Stud Length, M12 x 1.5 Thread, 14 mm Thread Length, 6860 N Dynamic/8050 N Static Load, 9600 rpm Maximum, -20 to 250 deg F, Eccentric Stud, Sealed Closure, Hex Head, Chrome Steel Roller, 8620H Steel Stud, Black Oxide
Features:
- Full complement needle roller construction provides high radial load capacity, it also provides improved resistance to shock loading versus caged needle bearing
- It provides improved resistance to shock loading versus caged needle bearing
- A heavy sectioned outer race design to help withstand shock loading of cam follower operation
- Inner studs are induction heat treated in the roller path and flange surfaces
- Our sealed bearing option helps extend bearing life by utilizing a lubrication groove and LUBRI-DISC seals
- Bearings are supplied pre-lubricated with lithium soap thickened grease
- The annular groove in the outer raceway provides a lubrication reservoir which increases the pre-lubricated life of the bearing
- The threads are manufactured to a class 2 tolerance
Specs:
| Stud Material | 8620H Steel |
|---|---|
| Stud Type | Eccentric |
| Stud Diameter | 12 mm |
| Stud Length | 25 mm |
| Roller Material | Chrome Steel |
| Roller Width | 14 mm |
| Roller Diameter | 30 mm |
| Thread Length | 14 mm |
| Head Type | Hex |
| Temperature Rating | -20 to 250 deg F |
| Load Capacity | 6860 N Dynamic/8050 N Static |
| Closure Type | Sealed |
| Thread Size | M12 x 1.5 |
| Finish | Black Oxide |
| Maximum Speed | 9600 rpm |
| Type | Cylindrical OD |
| Series | MCFRE |
Packaging:
| Length | 1.37 in |
|---|---|
| Width | 1.37 in |
| Height | 1.57 in |
Certifications/Standards:
ABMA Standard
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | McGill Bearing |
| Model | MCFE 26A SB |
| Brand | JW Winco |
| Model | 817-5-8-M10X1-G |
| Brand | JW Winco |
| Model | 817.2-8-12-M16X1.5-CK |
| Brand | JW Winco |
| Model | 617-5-3/8X24-AK |
