We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The McGill CF 1 1/4 SB CR is a 1-1/4 inch roller diameter stainless CAMROL cam follower with standard stud construction and LUBRI-DISC seal. Built from 440C stainless steel with a hex hole drive. Used in cam mechanisms, packaging machinery, and food-grade washdown applications.
MODEL CF 1 1/4 SB CR
Contact supplier for technical support on: 800-626-2120
$141.86 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Ability to Relubricate
Yes
Adjustment
None
Clamping Torque (in-lbf)
350
Dynamic Load Rating (lb)
3530
Height
2.18
Hex Socket (in)
0.25
Hex/Slot
Hex Hole
Length
1.5
Lubrication Fitting Size (in)
0.1875
Oil Hole Diameter (in)
0.094
Stud Diameter (in)
0.5
Stud Length (in)
1.25
Threads
1/2-20
Tolerance Class
P0 Equivalent
Regal Beloit Mcgill&Reg; CF 1 1/4 SB CR
UPC: 726166118327 | UNSPSC: 26101708 | GTIN:
Bearings > Cam Follower & Yoke Rollers > Crowned/Flat Follower & Track Runners
McGill CAMROL Cam Follower, Cylindrical OD, Series: CF Series, 1-1/4 in Roller Diameter, 3/4 in Roller Width, 1/2 in Stud Diameter, 1-1/4 in Stud Length, 1/2-20 UNC Thread, 5/8 in Thread Length, 3530 lb Dynamic/2050 lb Static Load, 3100 rpm Maximum, -20 to 250 deg F, Standard Stud, Sealed Closure, Hex Head, Chrome Steel Roller, 8620H Steel Stud, Black Oxide
Features:
- Full complement needle roller construction provides high radial load capacity, it also provides improved resistance to shock loading versus caged needle bearing
- It provides improved resistance to shock loading versus caged needle bearing
- A heavy sectioned outer race design to help withstand shock loading of cam follower operation
- Inner studs are induction heat treated in the roller path and flange surfaces
- Our sealed bearing option helps extend bearing life by utilizing a lubrication groove and LUBRI-DISC seals
- Bearings are supplied pre-lubricated with lithium soap thickened grease
- The annular groove in the outer raceway provides a lubrication reservoir which increases the pre-lubricated life of the bearing
- The threads are manufactured to a class 2 tolerance
- Corrosion resistant
Specs:
| Stud Material | 8620H Steel |
|---|---|
| Stud Type | Standard |
| Stud Diameter | 1/2 in |
| Stud Length | 1-1/4 in |
| Roller Material | Chrome Steel |
| Roller Width | 3/4 in |
| Roller Diameter | 1-1/4 in |
| Thread Length | 5/8 in |
| Head Type | Hex |
| Temperature Rating | -20 to 250 deg F |
| Load Capacity | 3530 lb Dynamic/2050 lb Static |
| Closure Type | Sealed |
| Thread Size | 1/2-20 UNC |
| Finish | Black Oxide |
| Maximum Speed | 3100 rpm |
| Type | Cylindrical OD |
| Series | CF Series |
Packaging:
| Length | 1.5 in |
|---|---|
| Width | 1.75 in |
| Height | 2.18 in |
Certifications/Standards:
ABMA Standard
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2490344
Brand
Carter
Model
SC-40-SB
| Brand | MROSupply Fasteners |
| Model | FSTPCK-847026 |
| Brand | U.S. Seal Mfg. |
| Model | PS-262-EPR-P66 |
| Brand | Consolidated Bearings |
| Model | TS-3072 X 340 MM |