We never sell your data to third parties
Rollway NU 1022 M C3 110 mm Bore Size, 170 mm Outside Diameter, Radial Cylindrical Roller Bearing, Caged Roller, Straight Bore, Unsealed, High Chromium Bearing Steel, C3 Radial Clearance 110 mm Bore Size, 170 mm Outside Diameter, Radial Cylindrical Roller Bearing, Caged Roller, Straight Bore, Unsealed, High Chromium Bearing Steel, C3 Radial Clearance
MODEL NU 1022 M C3
Contact supplier for technical support on: 800-626-2120
$3,502.77 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore Size (mm)
110
Bore Type
Straight
Cage Material
Brass
Duplexing
No
Dynamic Load Rating (lb)
28551
Full Complement/Caged
Caged
Height
6.69
Inner Race Configuration
Separable Both Directions
Length
6.69
Material
High Chromium Bearing Steel
Misalignment
No
Number of Rows
1
O.D. (mm)
170
Outer Race Configuration
Non-Separable
Overall Width (mm)
28
Platform
Cylindrical Radial
Profile
Complete with Outer and Inner Race
Radial Clearance
C3
Retainer
Yes
Rolling Element
Cylindrical Roller
Seal Type
Unsealed
Sealed
None
Snap Ring
No
Speed [Max] Grease (RPM)
3600
Speed [Max] Oil (RPM)
4500
Static Load Rating (kN)
167
Static Load Rating (lb)
37543
Version
M: Machined brass retainer
Width
1.1
| Rows of rollers | Single row |
|---|---|
| Retainer | Machined Brass |
| Inner Race Configuration | Separable Both Directions |
| Outer Race Configuration | Non-Separable |
| Version | M: Machined brass retainer |
| Additional Information | Suitable for radial loads only |
| Sale Qty Multiple: | 1 |
|---|---|
| Packaged Length: | 6.77 |
| Packaged Width: | 6.77 |
| Packaged Height: | 2.05 |
| No. Links/Ft. : | 0 |
| Rows of rollers: | Single row |
| Retainer: | Machined Brass |
| Inner Race Configuration: | Separable Both Directions |
| Outer Race Configuration: | Non-Separable |
| Version: | M: Machined brass retainer |
| Additional Information: | Suitable for radial loads only |
Dimensions
| Part No | NU 1022 M C3 |
|---|---|
| Description | NU 1022 M C3 |
| d | 110mm (4.3307 inch) |
| D | 170mm (6.6929 inch) |
| B | 28mm (1.1024 inch) |
| Basic Dynamic Rating Cr | 127kN (28, 551 pounds) |
| Basic Static Rating Cor | 167kN (37, 543 pounds) |
| Limiting Speed Grease (RPM) | 3, 600 |
| Limiting Speed Oil (RPM) | 4, 500 |
| F | 125mm (4.9213 inch) |
| rs min | 2mm (0.0787 inch) |
| r1s min | 1.1mm (0.0433 inch) |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.