We never sell your data to third parties
Osborn PLR-1 1/2 0009508600 Load Runner
MODEL 0009508600
This vendor has a minimum order quantity of 3. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: marketsupport@osborn
$75.15 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 3
Typically Ships in: 1 day
Returnable:No
Roller O.D.
1.50
Roller Width
1.187
Stud Length
1-1/2
| Item No. | 95086 |
|---|---|
| Description | PLR-1-1/2 |
| Detail | |
| Wt Std Pk lbs | 0.5 lbs |
| Std Pk | 1 |
| Type | LR Imperial |
| Brand | Osborn |
| Part Number | PLR-1-1/2 |
| Scale | Imperial |
| A Roller Dia In | 1-1/2 In |
| A Tolerance | +0.000 -0.001 |
| B Roller Width In | 1.187 In |
| K Stud Dia In | 5/8 In |
| K Tolerance | +0.000 -0.001 |
| L Stud Length In | 1-1/2 In |
| M Thread Length In | 3/4 In |
| N Thread | 5/8-18 |
| R Shoulder Dia In | 3/4 In |
| S Shoulder Length In | 0.062 In |
| Recommended Mounting Hole Size In | 0.626 In |
| Recommended Mounting Hole Tolerance | +0.001 -0.000 |
| Approx Wt lbs | 0.5 lbs |
| Bearing | BB |
| Radial Capacity 3000hrs L10 Life @100 RPM lbs | 1050 lbs |
| Radial Capacity 500hrs L10 Life @33-1/3 RPM lbs | 2760 lbs |
| Radial Capacity Static Limit lbs | 1100 lbs |
| Thrust Capacity Static Limit lbs | 680 lbs |
| Mounting Member Thickness Max In | 1 In |
| Mounting Member Thickness Min In | 3/4 In |
| Stud Capacity Bend @B/2 lbs | 1390 lbs |
| Stud Capacity Bend @B lbs | 650 lbs |
| Stud Capacity Shear lbs | 5780 lbs |
| Retaining Ring Capacity lbs | 470 lbs |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
