We never sell your data to third parties
Smith Bearing MCRV-35-SB is a metric full-complement stud-type cam follower with a 35mm roller OD and M16x1.5 thread. It features a hex head slot and sealed design. The roller width is 18mm, stud length 32.5mm, and overall length 52mm. Dynamic load rating is 18,300 N, static load rating 35,000 N, and track roller dynamic load 12,800 N. Maximum speed is 3,400 RPM.
MODEL MCRV-35-SB
Contact supplier for technical support on: 800-932-0076
$76.57 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Additional note4
Tolerance for C Raceway Width is +0.00/-0.12 mm
B2
8
Basic Dynamic Load Rating (newtons)
18300
Basic Load Rating (Track Roller) Static (newtons)
23000
Basic Static Load Rating (newtons)
35000
C1
0.8
d2
27
M
6
M1
3
Mass (grams)
184
Max. Speed (rpm)
3400
Overall Length (mm)
52
Roller O.D. (mm)
35
Roller Width (mm)
18
rs
0.60
SMITH Bearing Number
MCRV-35-SB
Stud Dia. (mm)
16
Stud Length (mm)
32.5
Thread (mm)
M16 x 1.5
Thread Length (mm)
17
Track Roller Dynamic Load(newtons)
12800
Cam Followers The MCRV-35-SB Full Compliment Stud Type Hex Head Slot Sealed Metric Needle Bearing Cam Follower from Smith Bearings is expertly engineered to provide exceptional performance in demanding applications. This precision needle roller bearing is designed to accommodate high radial loads while ensuring low friction and enhanced durability.
Key Features
| Stud Type Design | Features a robust stud configuration that allows for easy mounting and alignment in various applications. |
|---|---|
| Sealed Construction | Incorporates a sealed design to protect against contaminants, enhancing the lifespan and reliability of the bearing. |
| Metric Dimensions | Engineered to metric specifications, ensuring compatibility with a wide range of industrial and aerospace applications. |
| Full Complement | Utilizes a full complement of needle rollers, which maximizes load capacity and reduces wear for improved performance. |
| Hex Head Slot | Designed with a hex head slot for secure fastening, allowing for precise torque application during installation. |
Applications
- Ideal for use in machinery, robotics, and equipment requiring reliable cam follower systems.
- Suitable for both industrial and aerospace applications, particularly where high thrust loads and precise motion are critical.
- Perfect for environments subject to contamination, thanks to its sealed design that prevents the ingress of dirt and debris.
Benefits
| Enhanced Load Capacity | The full complement design allows for greater load-bearing capability compared to standard designs, making it ideal for heavy-duty applications. |
|---|---|
| Improved Durability | The sealed construction provides superior protection against environmental factors, extending the service life of the bearing. |
| Reliable Performance | Designed with precision engineering, ensuring consistent and reliable movement in applications where accuracy is critical. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Champion |
| Model | CM86-1-3/16 |
| Brand | Pramet |
| Model | TCMT 21.51-UR:T8330 |
| Brand | Dichtomatik |
| Model | V5.70X045.3 |
| Brand | INA Bearing |
| Model | KTX24PP |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.