We never sell your data to third parties
Smith Bearing MCRV-19-BC metric full-complement cam follower with 19mm roller OD and hex head drive. This stud-type cam follower features a cylindrical outer ring and is unsealed. Designed for high radial load capacity in confined spaces, it is suitable for cam actuation and track guidance applications.
MODEL MCRV-19-BC
Contact supplier for technical support on: 800-932-0076
$47.40 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Cam Followers The MCRV-19-BC Full Compliment Stud Type Hex Head Slot Cylindrical Metric Needle Bearing Cam Follower from Smith Bearings is engineered for high-performance applications in both aerospace and industrial sectors. With over 50 years of expertise, Smith Bearings delivers a precision component designed to enhance operational efficiency and reliability.
Key Features
| Design | Full compliment needle roller design for maximum load-carrying capacity |
|---|---|
| Material | Constructed from high-quality steel for enhanced strength and durability |
| Size | Metric dimensions tailored for specific application requirements |
| Hex Head Configuration | Facilitates secure mounting and alignment in machinery |
| Performance | Capable of supporting high-thrust load applications with minimal friction |
Applications
| Industrial Machinery | Ideal for use in conveyor systems, robotics, and automated equipment |
|---|---|
| Aerospace | Approved for use in engines and airframes, adhering to strict aerospace standards |
| Corrosive Environments | Available in stainless steel variants for enhanced resistance to corrosion |
Benefits
| Enhanced Load Capacity | The full compliment design allows for heavier loads, improving operational efficiency |
|---|---|
| Reliable Performance | Engineered with precision to reduce wear and extend service life |
| Versatile Compatibility | Suitable for a broad range of applications, enhancing equipment flexibility |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.