We never sell your data to third parties
Smith Bearing MCRV-85-SC is a metric full-complement stud-type cam follower with 85mm roller OD, M30x1.5 thread, and 35mm roller width. It features a cylindrical outer ring, screwdriver slot drive, and sealed design. Dynamic load rating is 60000 N, static load rating is 142000 N. Suitable for track roller applications with reduced load ratings Cw and Cow.
MODEL MCRV-85-SC
Contact supplier for technical support on: 800-932-0076
$246.05 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Additional note4
Tolerance for C Raceway Width is +0.00/-0.12 mm
B2
15
Basic Dynamic Load Rating (newtons)
60000
Basic Load Rating (Track Roller) Static (newtons)
120000
Basic Static Load Rating (newtons)
142000
C1
1
d2
53
M
8
M1
4
Mass (grams)
1820
Max. Speed (rpm)
1700
Overall Length (mm)
100
Roller O.D. (mm)
85
Roller Width (mm)
35
rs
1.1
SMITH Bearing Number
MCRV-85-SC
Stud Dia. (mm)
30
Stud Length (mm)
63
Thread (mm)
M30x1.5
Thread Length (mm)
32
Track Roller Dynamic Load(newtons)
44000
Cam Followers The Smith Bearings MCRV-85-SC is a high-performance full complement stud type cylindrical sealed metric needle bearing cam follower designed for superior load-bearing capacity and reliable operation in various industrial and aerospace applications. Engineered with precision, this cam follower is ideal for applications requiring durability and efficiency.
Key Features
| Full Complement Design | Allows for maximum load capacity by utilizing the full complement of needle rollers, enhancing performance in high-load situations. |
|---|---|
| Sealed Construction | The sealed design protects against contamination from dirt and debris, ensuring long-lasting performance and minimal maintenance. |
| Stud Type Configuration | Features a convenient screwdriver slot for easy installation and adjustment, making it user-friendly for various setups. |
| Metric Dimensions | Specifically designed to meet metric standards, providing compatibility with international applications and equipment. |
| Quality Assurance | Manufactured under stringent ISO 9001 and AS 9100 quality standards, ensuring reliability and consistent performance in critical applications. |
Applications
| Industrial Machinery | Perfect for use in conveyor systems, robotics, and automated machinery where precision and reliability are paramount. |
|---|---|
| Aerospace | Approved for aerospace applications, this cam follower meets the rigorous demands of engines and airframes, ensuring safety and efficiency. |
| Heavy Equipment | Suitable for heavy-duty applications where high thrust loads and dynamic stresses are present, delivering exceptional performance under challenging conditions. |
Benefits
| Enhanced Load Capacity | The full complement design significantly increases the bearing's load-bearing capabilities, making it ideal for heavy-duty applications. |
|---|---|
| Reduced Downtime | The sealed construction minimizes the risk of contamination, leading to longer service life and reduced maintenance needs. |
| User-Friendly Installation | The stud type configuration with a screwdriver slot facilitates quick and easy installation, saving time and labor costs. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Dichtomatik |
| Model | V5.30X122 |
| Brand | Champion |
| Model | 328X13/16-8-36 |
| Brand | Superlok |
| Model | SPC-8 |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.