We never sell your data to third parties
Smith Bearing VCR-3-1/2 V-Groove Stud-Type Cam Follower with a 3.500" outside roller diameter and 7/8-14 UNF thread. This tapered roller bearing track roller features a 0.875" stud diameter, 2" stud length, and 1-11/16" roller width. It has a radial dynamic rating of 3,490 lbs and static capacity of 2,000 lbs. The V-groove design accommodates track guidance applications.
MODEL VCR-3-1/2
Contact supplier for technical support on: 800-932-0076
$92.87 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bearing Type
TRB
Center of V-Groove
7/8
Dynamic Thrust Load Rating (lbs) 500 hrs. 33 rpm.
1,830
Eff. Thread Min.
1-1/8
Hex Size
5/16
Max. Static Capacity (lbs)
2,000
Outside Roller O.D.
3.500
Point Diameter
2.250
Radial Basic Dynamic Rating (lbs) 500 hrs. 33 rpm.
3,490
Roller Width
1-11/16
Shoulder Length
0.062
Shoulder Width Or End Plate Diameter
1
SMITH Bearing Number
VCR-3-1/2
Stud Dia.
0.875
Stud Dia. Tolerance
+.001/-.000
Stud Length
2
Thread U.N.F. Class 2A
7/8-14
| Specifications: | |
|---|---|
| (D) Outside Roller O.D. | 3.500 |
| (B) Roller Width | 1-11/16 |
| (A) Stud Dia. | 0.875 |
| (M) Stud Length | 2 |
| Radial Basic Dynamic Rating (lbs) 500 hrs. 33 rpm. | 3,490 |
| Max. Static Capacity (lbs) | 2,000 |
| (G) Center of V-Groove | 7/8 |
| SMITH Bearing Number | VCR-3-1/2 |
| (H) Hex Size | 5/16 |
| (V) Point Diameter | 2.250 |
| Dynamic Thrust Load Rating (lbs) 500 hrs. 33 rpm. | 1,830 |
| Bearing Type | TRB |
| (A) Stud Dia. Tolerance | +.001/-.000 |
| (S) Eff. Thread Min. | 1-1/8 |
| (T) Thread U.N.F. Class 2A | 7/8-14 |
| (C) Shoulder Length | 0.062 |
| (R) Shoulder Width Or End Plate Diameter | 1 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2249735
Brand
McGill Bearing
Model
VCF 3 1/2
#2490203
Brand
Carter
Model
VHR-350-A
#2787235
Brand
PCI
Model
VTRE-3.50E
#2543303
Brand
Osborn
Model
0009567800
| Brand | Cleveland |
| Model | C76358 |
| Brand | Gates Rubber |
| Model | QD2C11.0 |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.