We never sell your data to third parties
NTN 5316 double-row angular contact ball bearing with 80 mm straight bore. Open design with no seals or shields. Suitable for applications requiring high radial and axial load capacity in both directions, such as pumps, compressors, and gearboxes.
MODEL 5316
$595.96 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Enclosure
Open
Height
6.693
I.D.
80 mm
Length
6.693
O.D.
170 mm
Width
2.689
Technical Specifications
Type |
Angular Contact Ball Bearing |
|---|---|
Bore Type |
Round |
Outside Ring Type |
Straight |
Material |
High Carbon Chrome Steel |
Cage Type |
Pressed |
Cage Material |
Steel |
Ball Material |
Steel |
Precision |
Class 0 |
Configuration |
Two |
Radial Internal Clearance |
CN |
Static Load Rating |
36500 lbf163000 N163.00 kN |
Dynamic Load Rating |
42500 lbf188000 N188.00 kN |
Enclosure |
Open |
Operating Temperature Range |
-40 to 250 F-40 to 120 C |
Dimensional Specifications
|
|
|
d |
3.1496 in80.000 mm |
|---|---|
D |
6.6929 in170.000 mm |
B |
2.6890 in68.300 mm |
r |
0.0827 in2.100 mm |
Contact Angle |
25 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.