We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF 7202 BEP is a 15mm bore angular contact ball bearing with a 40° contact angle. It features an enhanced polyamide cage (BEP) for reduced friction and higher speed capability. Designed for combined radial and axial loads in pumps, gearboxes, and machine tool spindles.
MODEL 7202 BEP
$34.36 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Axial Internal Clearance
Not applicable
Basic Dynamic Load Rating
8.32 kN
Basic Static Load Rating
4.4 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
15 mm
Cage
Non-metallic
Coating
Without
Contact Angle
40 °
Contact Type
Normal contact (two-point contact)
Dimension Type
Metric
Inner Diameter (mm)
15.000
Limiting Speed
24000 r/min
Lubricant
None
Lubricant (in Bearing)
None
Matched Arrangement
No
Material/Treatment
Bearing steel
Number of Rows
1
O.D. (in)
1 3/8
Outer Diameter (mm)
35.000
Pack Height
47 mm
Pack Length
45 mm
Pack Width
17 mm
Reference Speed
24000 r/min
Relubrication Feature
Without
Ring Type
One-piece
Sealing
None
Tolerance Class
Normal
Type
Normal contact (two-point contact)
Universal Matching Bearing
No
Width
11 mm
Width (mm)
11.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#207634
Brand
Nachi Bearing
Model
7202B
#2889845
Brand
Rollway
Model
7202 B
#2176445
Brand
FAG Bearing
Model
7202B.JP
#5045198
Brand
NTN Bearing
Model
7202B
| Brand | NSI Industries |
| Model | TA94RN5 |
| Brand | MRO Supply |
| Model | 2405-10-08-SS |
| Brand | MRO Supply |
| Model | 6506-08-12 |
| Brand | Precision Twist Drill |
| Model | QC21G3/32 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF