We never sell your data to third parties
SKF TMEH 1 hydraulic pump for bearing mounting and dismounting. Generates up to 700 bar pressure for safe installation of bearings on tapered shafts. Compact and portable, suitable for maintenance workshops and field service.
MODEL TMEH 1
$2,062.82 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Pack Height
88 mm
Pack Length
533 mm
Pack Width
185 mm
Oil analysis tool
The SKF TMEH 1 is a portable instrument that displays immediate information on the machinery oil condition. By comparing the measurements obtained from used and unused oils of the same type and brand, the oil check monitor is able to determine the degree of change in the condition of the oil, allowing the user to achieve optimised intervals between oil changes and detect increased mechanical wear and loss of the oil s lubricating properties.
- Shows changes in oil condition affected by water, fuel, metal and/or oxidation
- Numerical read-out to facilitate trending
- Can store calibration (good oil) to memory
- Hand held and user friendly
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Edwards |
| Model | AC1024-S4 |
| Brand | NoTrax |
| Model | 109S0048GN |
| Brand | Palmgren |
| Model | 9683138 |
| Brand | MRO Supply |
| Model | C2060HSS |
| Brand | Precision Twist Drill |
| Model | 5ATS44.0 |
| Brand | Orbit Industries |
| Model | RB-150/75 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF