We never sell your data to third parties
SKF TMFS 8 is a maintenance tool designed for bearing installation and removal. This tool facilitates safe and efficient mounting and dismounting of bearings, reducing the risk of damage during maintenance procedures.
MODEL TMFS 8
$459.24 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Allows Bearing Mounting
Yes, angle method or with clearance reduction measurement
Coating
Black oxide
Colour
Metallic Black
Drive Connection
1/2"
Effective Height
58 mm
Fits on Lock Nuts Inside SKF Split Pillow Block Housings (SNL)
No
Height
82 mm
Material
Alloy engineering steel, hardened and tempered
Outer Diameter
68 mm
Outer Diameter Lock Nut
58 mm
Pack Height
110 mm
Pack Length
75 mm
Pack Width
75 mm
The TMFS axial lock nut sockets are used to mount bearings on tapered journals or adapter sleeves and for dismounting bearings on withdrawal sleeves. Available in 21 different sizes, they are suitable for various locknuts sizes 0 to 20.
- Good alternative to hook spanners, making the use of power tools or torque wrenches possible
- Allow the use of torque wrenches
- The sockets are provided with a zinc flake coating to assure corrosion protection.
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF