We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF Bearing TMBS 50E Maintenance Products
MODEL TMBS 50E
$395.96 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Case Dimensions (l X H X W)
295 x 190 x 50 mm
Coating
Black phosphated
Colour
Black
Dismounting Force Generation
Spindle
Hexagon Size Spindle Head
19 mm
Material
Alloy engineering steels, hardened and tempered
Pack Height
58 mm
Pack Length
325 mm
Pack Width
205 mm
Pulling Force (max)
30 kN
Reach, using separator (max)
110 mm
Relative Humidity
max 75%
Separator Height
16 mm
Shaft diameter range, using separator
7 to 50 mm
Spindle Nose Piece
no
Spindle Torque (max)
70 N·m
Suitable for Bearing Dismounting from A Sleeve (adapter or Withdrawal Sleeve)
Yes
Suitable for Bearing Dismounting from A Tapered Seating (conical Shaft)
Yes
Suitable for Bearing Type(s)
All
Suitable for Workpiece Dismounting from A Blind Arrangement (housing with Shaft)
No
Suitable for Workpiece Dismounting from A Cylindrical Seating (straight Shaft)
Yes
Suitable for Workpiece Dismounting from A Housing
No
Total Spindle Length
138 mm
Workpiece outer diameter range, using separator
10 to 85 mm
Strong back puller with Mechanical spindle
The SKF TMBS 50E strong back puller facilitates dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or when the application requires a long reach. The puller is operated mechanically and especially suitable for small shaft diameters. A special separator design is used that can be easily inserted between the bearing and the shoulder on the shaft.
- Easily separator placement between bearing and shoulder on the shaft
- Spring-loaded centre point of spindle allows easy puller centring and minimises the risk of shaft damage
- Dismounting force is generated by mechanical spindle
- Firm grip behind the bearing's inner ring reduces the force required to dismount the bearing
| Brand | System Plast |
| Model | 13722 |
| Brand | NTN Bearing |
| Model | UCP208D1 |
| Brand | FK Bearing |
| Model | ALJM3Z |
| Brand | PTI |
| Model | SPA100X5-1615 |
| Brand | Hydraulic Technologies |
| Model | 100200 |
| Brand | PEER Bearing |
| Model | F3X-204-H |
| Brand | Pramet |
| Model | WNMG 432-NF:T8330 |
| Brand | Gates Rubber |
| Model | 4/5VX750 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF