We never sell your data to third parties
SKF HMV 38E Hydraulic nut used for mounting and dismounting bearings with a tapered bore. It operates by injecting oil under high pressure to expand the nut axially, enabling precise and safe bearing installation or removal. This tool is suitable for maintenance and repair applications on large industrial machinery.
MODEL HMV 38E
$3,848.64 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Connecting Thread
M 190x3
Maximum Piston Displacement
7 mm
Maximum Pressure
80 MPa
Outer Diameter
270 mm
Pack Height
70 mm
Pack Length
373 mm
Pack Width
378 mm
Piston Area
11500 mm²
Piston Inner Diameter
191 mm
Piston Outer Diameter
259 mm
Piston Width
8 mm
Product Weight
10.5 kg
Thread Form
ISO 965/111-1980 tolerance class 6H
Type
Metric thread
Width
42 mm
Hydraulic nut for mounting or dismounting of bearings
Facilitates easy and quick application of the high drive-up forces required for mounting bearings on tapered seatings. The hydraulic nut can also be used for dismounting bearings mounted on either adapter or withdrawal sleeves.
- Quick connection coupling can be fitted on the face or side of the nut
- A spare set of piston seals and maintenance kit is included
- Supplied with a quick connection coupling to fit the SKF hydraulic pumps
- Equipped with eyebolts, two tommy bars and four mating holes on their front face
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Regal Cutting Tools |
| Model | 027410AS |
| Brand | Champion |
| Model | 799L-1-1/2X90 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF