We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF 216 NR is an 80mm bore deep groove ball bearing with a snap ring groove on the outer ring. This open bearing has normal clearance and a pressed steel cage. Suitable for electric motors, pumps, and general industrial machinery.
MODEL 216 NR
$228.75 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Basic Dynamic Load Rating
88 kN
Basic Static Load Rating
85 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
Snap ring (fitted)
Bore Diameter
80 mm
Bore Type
Cylindrical
Cage
Sheet metal
Coating
Without
Dimension Type
Metric
Filling Slots
With
Inner Diameter (mm)
80.000
Limiting Speed
5000 r/min
Locating Feature Bearing
Snap ring (fitted)
Lubricant
None
Lubricant (in Bearing)
None
Matched Arrangement
No
Material/Treatment
Bearing steel
Number of Rows
1
O.D.
140 mm
Outer Diameter (mm)
149.700
Pack Height
156 mm
Pack Length
154 mm
Pack Width
32 mm
Radial Internal Clearance
C0
Reference Speed
8500 r/min
Relubrication Feature
Without
Seal Type
N/A
Sealing
None
Tolerance Class
Normal
Width
26 mm
Width (mm)
26.000
SKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreSKU: 315294
Bearing
Old hard to find bearing for a 85 year old tractor. Fit perfect and price was great.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#5035633
Brand
NSK Bearings
Model
BL216NR
| Brand | MROSupply Fasteners |
| Model | FSTPCK-371100 |
| Brand | Gates Rubber |
| Model | PB60MXL025 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-847458 |
| Brand | Hydraulic Technologies |
| Model | RD15028 |
| Brand | Tingley |
| Model | 1150-2XL |
SKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreSKU: 315294
Bearing
Old hard to find bearing for a 85 year old tractor. Fit perfect and price was great.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF