We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Link-Belt MR1217EAX 10472523 is a Series 1200 unmounted cylindrical roller bearing with 85 mm bore, single-rib inner ring, and double-rib outer ring. This light-series bearing features direct shaft mount and 52100 bearing steel construction. The 150 mm OD and narrow ring width suit moderate-speed industrial applications.
MODEL 10472523
Contact supplier for technical support on: 800-626-2120
$493.42 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Basic bearing sumber
1217
Bearing width (mm)
28 mm
Bore size (mm)
85 mm
Bore type
Straight
C dynamic load rating
Call eng lb
Co static load rating
Call eng lb
Housing Shoulder Diameter (Plain Outer Ring) [Max] (mm)
139.2 mm
Housing Shoulder Diameter (Ribbed Outer Ring) [Max] (mm)
134.1 mm
Inner Ring and Roller Assembly Over Roller Diameter (mm)
134.13 mm
Inner ring bore radius (mm)
3.18 mm
Inner Ring Raceway Outside Diameter (mm)
102.01 mm
Inner Ring Rib Outside Diameter (mm)
108.05 mm
Inner ring type
Single Rib (R)
Maximum Speed (RPM)
CALL ENG rpm
Mounted clearance
See description
Outer Ring and Roller Assembly Under Roller Diameter (mm)
102.09 mm
Outer Ring Raceway Inside Diameter (mm)
134.22 mm
Outer Ring Rib Inside Diameter (mm)
128.42 mm
Outer ring type
Double rib outer ring (E)
Outside diameter (mm)
150 mm
Retainer type
See description
Ring width series
Narrow (1)
Rolling element
Cylindrical
Series
Unmounted Bearings
Shaft locking
Direct shaft mount
Shaft Shoulder Diameter (Plain Inner Ring) [Min] (mm)
98 mm
Shaft Shoulder Diameter (Ribbed Inner Ring) [Min] (mm)
101.8 mm
Vibration frequency fundamental train
Call Eng cps
Vibration frequency inner ring defect
Call Eng cps
Vibration frequency outer ring defect
Call Eng cps
Vibration frequency roller spin
Call Eng cps
85 mm Cylindrical Roller Bearing with single rib inner ring, double rib outer ring & segmented retainer, Oversize OD outer ring
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Slew ring bearings, also referred to as slewing bearings, slewing rings, or turntable bearings, are forms of bearings designed to allow rotational motion between several components.
Read More