We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Link-Belt MR67220EAHXW916 (mfg part 10472602) is a Series 7200 unmounted cylindrical roller bearing with a 100 mm bore and 215 mm OD. This high-capacity bearing features a single-rib inner ring and double-rib outer ring, designed for light-series applications. Constructed from 52100 bearing steel with a contact seal, it delivers reliable performance in industrial machinery.
MODEL 10472602
Contact supplier for technical support on: 800-626-2120
$432.79 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Basic bearing sumber
7220
Bearing width (mm)
41 mm
Bore size (mm)
100 mm
C dynamic load rating
Call eng lb
Co static load rating
Call eng lb
Housing Shoulder Diameter (Plain Outer Ring) [Max] (mm)
194.6 mm
Housing Shoulder Diameter (Ribbed Outer Ring) [Max] (mm)
184.6 mm
Inner ring bore radius (mm)
4.75 mm
Inner Ring Raceway Outside Diameter (mm)
130.17 mm
Inner Ring Rib Outside Diameter (mm)
140.46 mm
Inner ring type
Single Rib (R)
Maximum Speed (RPM)
CALL ENG rpm
Mounted clearance
See description
Outer Ring Raceway Inside Diameter (mm)
184.91 mm
Outer Ring Rib Inside Diameter (mm)
175.06 mm
Outer ring type
Double rib outer ring (E)
Outside diameter (mm)
215 mm
Retainer type
See description
Ring width series
Intermediate (7)
Rolling element
Cylindrical
Series
Unmounted Bearings
Shaft Shoulder Diameter (Plain Inner Ring) [Min] (mm)
122.4 mm
Shaft Shoulder Diameter (Ribbed Inner Ring) [Min] (mm)
130 mm
Vibration frequency fundamental train
Call Eng cps
Vibration frequency inner ring defect
Call Eng cps
Vibration frequency outer ring defect
Call Eng cps
Vibration frequency roller spin
Call Eng cps
Contact Application Engineering
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Bondhus |
| Model | 10764 |
| Brand | Balax |
| Model | 11864-00T |