We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 140459 P2B-SXRB-203-HTS two-bolt pillow block bearing with 2-3/16" bore, eccentric collar locking, cast iron housing, standard duty rating, high temperature capability to 400°F, DualGuard seal, 211 series. 2-3/16" bore Pillow Block 2-Bolt Ball Bearing with Eccentric Locking locking used in General Purpose applications
MODEL P2B-SXRB-203-HTS
Contact supplier for technical support on: +1-864-284-5700
$508.35 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
211 series
Base to center height
2.4400 in, 61.976 mm
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
6.0000 in, 152.4 mm
Bolt to bolt min
6.0000 in, 152.4 mm
Bore
2 3/16 in
Bore length
2.5900 in, 65.786 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
Yes
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 3/16
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Relubrication
Yes
Seal option
DualGuard seals with flingers
Seal type
Labyrinth
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
2.1875 in
Standoff housing
No
Suitable for high temperature
Yes
Suitable for washdown
No
Take-up frame size
LD-40, TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, cast iron construction
- Bore Diameter: 2-3/16" (55.562mm) exact
- Locking Mechanism: Quarter-turn eccentric collar locks in direction of shaft rotation
- Temperature Rating: High temperature capability to 400°F (204°C)
- Duty Rating: Standard duty for general industrial applications
- Bearing Series: 211 series ball bearing insert
- Seal Protection: DualGuard seal with rubberized flinger
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Applications: High temperature environments, conveyor systems, industrial machinery requiring eccentric collar convenience
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5904083
Brand
Dodge
Model
P2B-DLH-115-E-LL
#5003784
Brand
Dodge
Model
P2B-SXRB-203-HTS
#5904119
Brand
Dodge
Model
P2B-DLM-115-LL
#130121
Brand
Dodge
Model
P2B-SC-207-HT
| Brand | WILTON |
| Model | 28843 |
| Brand | Edwards |
| Model | PDSQ5/16 |
| Brand | Edwards |
| Model | PDSQ1/4 |
| Brand | WILTON |
| Model | 10025 |
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/