We never sell your data to third parties
SKF TMFT 36 is a bearing maintenance tool designed for mounting bearings. This tool facilitates safe and efficient installation of bearings, reducing the risk of damage during assembly. Suitable for use in industrial maintenance and repair applications.
MODEL TMFT 36
$1,396.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Allowed Temperature of The Mounting Object
-30-110 °C
Case Dimensions (l X H X W)
530 x 110 x 360 mm
Hammer Length
315 mm
Hammer Material
Steel, PU
Hammer Type
Deadblow hammer
Hammer Weight
0.9 kg
Hammer Width
115 mm
Hammerhead
Sturdy polyurethane (PU) preventing damage to the sleeve heads
Models of Rings
Three, named A, B, C
Mounting Depth
A, 221 mm; B, 221 mm; C, 226 mm
Mounting Force Generation
Hammer
Number of Rings
36
Number of Sleeves
Three, named A, B, C
Outer Diameter Sleeve
A, 25 mm; B, 45 mm; C, 66 mm
Pack Height
115 mm
Pack Length
530 mm
Pack Width
365 mm
Provided with Hand protectors
No
Ring Material
Impact resistant polyamide (PA)
Sleeve Material
Glassfiber filled polyamide (PA)
Sleeve Outer Lengths
A, 228 mm; B, 235 mm; C, 245 mm
Suitable for Bearing Mounting on A Sleeve (adapter or Withdrawal)
Not recommended
Suitable for Bearing Mounting on A Tapered Seating (conical Shaft)
Not recommended
Suitable for Workpiece Mounting in A Blind Arrangement (housing with Shaft)
Yes
Suitable for Workpiece Mounting in A Housing
Yes
Suitable for Workpiece Mounting on A Cylindrical Seating (straight Shaft)
Yes
Total Product Weight
4.4 kg
Workpiece Bore Diameter
10-55 mm
Workpiece Outer Diameter
26-120 mm
Bearing fitting tool kit
The TMFT 36 facilitates the mounting of different bearings with bore diameters from 10 55 mm (0.39 2.17 in). The right combination of impact ring and sleeve allows effective transmission of mounting force to the bearing ring with the interference fit, minimising the risk of damaging the bearing s raceways or rolling elements. The TMFT 36 is also suitable for mounting other components such as bushings, seals and pulleys.
- Facilitates correct mounting on shaft, housing and blind applications
- The diameter of the impact ring precisely fits the inner and outer diameter of the bearing
- Impact rings and sleeves are made of high impact resistant material for longevity and are also suitable for use under a press
- Impact rings are marked for clear visual identification of the ring s size and easy selection
- The nylon double-side head of the dead-blow hammer helps to prevent damaging the components
- All items packed in a strong, lightweight toolcase with comprehensive instructions and appicable bearing selection chart
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF