We never sell your data to third parties
Timken 9114PP deep groove radial ball bearing with contact seals on both sides. Single row design for moderate radial loads in pumps, fans, conveyors, and electric motor applications. Less than 12 inch outside diameter class. Deep groove geometry supports high-speed operation.
MODEL 9114PP
$115.12 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
0.7874 in Design units
Metric Inner ring backing diameter:77.72 mm
3.060 in Limiting speed (grease)
3333 rpm Limiting speed (oil):3889 rpm Manufacturing part number:9114PP Z6 FS50000 O.D. (in):110 mm 4.331 Outer ring backing diameter:116.08 mm
4.5700 in Static radial rating
30900 N
Ball type
Steel Bearing width:20 mm
Ball Type
STEEL
Bearing Width
20 mm 0.7874 in
Bore
70 mm
C0 - Static Radial Rating
30900 N 6940 lbf
Ce - Dynamic Radial Rating
42200 N 9490 lbf
d - Bore
70 mm
D - Outer Diameter
110 mm 4.3307 in
da - Inner Ring Backing Diameter
77.72 mm 3.060 in
Da - Outer Ring Backing Diameter
116.08 mm 4.5700 in
Design Units
Metric
DOuter Ring Backing Diameter
116.08 mm 4.5700 in
Dynamic Radial Rating
42200 N 9490 lbf
I.D.
70 mm
Inner Ring 'To Clear' Radius
1.09 mm 0.043 in
Inner Ring Backing Diameter
77.72 mm 3.060 in
Limiting Speed (Grease)
3333 rpm
Limiting Speed (Oil)
3889 rpm
Manufacturing Part Number
9114PP Z6 FS50000
Outer Diameter
110 mm 4.3307 in
Outer Ring 'To Clear' Radius
1.09 mm 0.043 in
R - Inner Ring "To Clear" Radius
1.09 mm 0.043 in
r - Outer Ring "To Clear" Radius
1.09 mm 0.043 in
Static Radial Rating
30900 N 6940 lbf
Radial ball bearings consist of an inner and outer ring with a cage containing a complement of precision balls. The standard Conrad-type bearing has a deep-groove construction capable of handling radial and axial loads from either direction in versatile designs that permit relatively high-speed operation.
In addition to standard single-row deep groove bearings, Timken offers special designs, including a maximum capacity series and an extra large (XLS) radial series bearing.
Size range: 3 mm - 600 mm (0.12 in. - 23.62 in.) bore
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Siemens Controls |
| Model | 6SE6400-0AP00-0AA1 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more