We never sell your data to third parties
Timken 217WDN deep groove radial ball bearing, open design for external lubrication. Standard duty, less than 12 inch outside diameter, suitable for moderate radial loads and high-speed operation in electric motors, pumps, and light machinery.
MODEL 217WDN
$422.79 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
1.1024 in Design units
Metric Inner ring backing diameter:95.20 mm
3.7480 in Limiting speed (grease)
2128 rpm Limiting speed (oil):2553 rpm O.D. (in):150 mm 5.9055 Outer ring backing diameter:140.0 mm
5.5118 in Static radial rating
99000 N
Ball type
Steel Bearing width:28 mm
Ball Type
STEEL
Bearing Width
28 mm 1.1024 in
Bore
85 mm
C0 - Static Radial Rating
99000 N 22300 lbf
Ce - Dynamic Radial Rating
127400 N 28600 lbf
d - Bore
85 mm
D - Outer Diameter
150 mm 5.9055 in
da - Inner Ring Backing Diameter
95.20 mm 3.7480 in
Da - Outer Ring Backing Diameter
140 mm 5.5118 in
Design Units
Metric
DOuter Ring Backing Diameter
140 mm 5.5118 in
Dynamic Radial Rating
127400 N 28600 lbf
I.D.
85 mm
Inner Ring 'To Clear' Radius
2 mm 0.079 in
Inner Ring Backing Diameter
95.20 mm 3.7480 in
Limiting Speed (Grease)
2128 rpm
Limiting Speed (Oil)
2553 rpm
Outer Diameter
150 mm 5.9055 in
Outer Ring 'To Clear' Radius
2 mm 0.079 in
R - Inner Ring "To Clear" Radius
2 mm 0.079 in
r - Outer Ring "To Clear" Radius
2 mm 0.079 in
Static Radial Rating
99000 N 22300 lbf
Radial ball bearings consist of an inner and outer ring with a cage containing a complement of precision balls. The standard Conrad-type bearing has a deep-groove construction capable of handling radial and axial loads from either direction in versatile designs that permit relatively high-speed operation.
In addition to standard single-row deep groove bearings, Timken offers special designs, including a maximum capacity series and an extra large (XLS) radial series bearing.
Size range: 3 mm - 600 mm (0.12 in. - 23.62 in.) bore
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Fibox |
| Model | P 252612 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more