We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Timken 6224-C3 is a deep groove radial ball bearing with a 120 mm bore and C3 radial internal clearance. Part of the 62 series, it features a dynamic load rating of 155.3 kN and a static load rating of 131.1 kN. This bearing is designed for general industrial applications such as electric motors, pumps, and conveyors where greater-than-normal clearance is required for thermal expansion or interference fits.
View suggested Nachi Bearing alternativeSave $307.09 on MROSupply.com preferred brand for this item - Nachi Bearing 6224C3
MODEL 6224-C3
$547.77 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
10.28 in Inner ring width
65 mm
14.09 in Outer ring width
65 mm
2.5591 in O.D. (in)
400 mm 15.748 Outer ring backing diameter:358 mm
2.5591 in Reference thermal speed rating (grease)
1400 RPM Static radial rating:1290000 N
290000 lbf Type
NU
Bearing Type
Standard DGBB
Bore
120 mm
Bore Size d
120 mm
C0r - Static Load Rating
131100 N
Clearance
C3
Cr - Dynamic Load Rating
155300 N
Design units
Metric Inner ring backing diameter:261.2 mm
Dynamic load rating
155.3 kN
Features
Open
Grease reference speed
4000 rpm
Grease Reference Speed
4000 rpm
Oil reference speed
5700 rpm
Oil Reference Speed
5700 rpm
Outside Diameter D
215 mm
Outside Ring Width B
40 mm
Radius Rs min
2.1 mm
Static load rating
131.1 kN
Timken’s deep groove ball bearings deliver reliable performance in a wide range of applications and conditions. With super-finished raceways and controlled geometries, our premium design helps ensure consistent quality.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | NK North America Inc. |
| Model | K0660.006101 |
| Brand | Remco Products |
| Model | 69604 |
| Brand | Dormer Pramet |
| Model | 5988878 |
| Brand | Bondhus |
| Model | 17192 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more