We never sell your data to third parties
Dodge 141136 P2B-DLH-111-E-HT-DRY two-bolt pillow block bearing with 1-11/16" bore, D-Lok concentric clamp locking, expansion (float) design for thermal growth, high temperature rated to 400°F, dry application capability, 209 series. 1-11/16" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL P2B-DLH-111-E-HT-DRY
Contact supplier for technical support on: +1-864-284-5700
$396.86 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
209 series
Base to center height
2.2500 in, 57.15 mm
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
6.0000 in, 152.4 mm
Bolt to bolt min
6.0000 in, 152.4 mm
Bore
1 11/16 in
Bore length
2.0100 in, 51.054 mm
Duty
Standard Duty
Expansion
Yes
Expansion capability
Expansion (float)
Greasable
Yes
High temp
Yes
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Relubrication
Yes
Seal option
DualGuard seals with flingers
Seal type
Labyrinth
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft diameter
1.6875 in
Standoff housing
No
Suitable for high temperature
Yes
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block bearing
- Bore Diameter: 1-11/16" (42.862mm)
- Locking Type: D-Lok concentric clamp collar - single Allen wrench tightening
- Expansion Type: Expansion (float) - accommodates thermal shaft growth
- Temperature Rating: High temperature rated to 400°F (204°C)
- Application: Dry application capability
- Housing Material: Cast iron
- Bearing Series: 209 series ball bearing
- Rolling Element: Ball bearing
- Seal Type: DualGuard seals with flingers
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#792195
Brand
Dodge
Model
128357
#5782925
Brand
Dodge
Model
P2B-DLH-111-E-HT-DRY
#127074
Brand
Dodge
Model
P2B-SCEZ-107-P
#122519
Brand
Dodge
Model
LD-20X12-TUFR
| Brand | Cleveland |
| Model | C94562 |
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/