We never sell your data to third parties
SKF P2B 012-RM 2-bolt pillow block bearing unit for 3/4 inch shaft with set screw locking. Pre-lubricated insert in a cast-iron housing. Suitable for conveyor head shafts, fan supports, and general industrial drives.
MODEL P2B 012-RM
$47.39 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
For material handling applications
Attachment Bolt Diameter
9.525 mm
Basic Dynamic Load Rating
12.7 kN
Basic Static Load Rating
6.55 kN
Bearing Material
Bearing steel
Bearing Sealing
Seal on both sides
Bore Type
Cylindrical
Centre Distance Between Bolt Holes
95.25 mm
Centre Height (pillow Block)
33.34 mm
Coating
Without
Fastening Bolt Hole Type
Plain
Grease Fitting
With
Hexagonal Key Size for Set Screw
3.175 mm
Housing
Cast iron
Housing Overall Width
34 mm
Housing Type
Pillow block
I.D.
3/4 in
Inner Ring Retaining Feature
Set screws
Limiting Speed
8500 r/min
Lubricant
Grease
Number of Bolt Holes for Fasteners
2
Pack Height
41 mm
Pack Length
136 mm
Pack Width
69 mm
Relubrication Hole
With
Rubber Seating Ring
Without
Sealing Type
Contact, standard
Set Screw
1/4-28 UNF
Set Screw Tightening Torque
4 N·m
Shaft Diameter
19.05 mm
Total Bearing Width
25.5 mm
Unit Sealing
Without
Pillow block ball bearing unit with narrow inner ring and set screw locking, North American standards
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is suitable for applications where the direction of rotation is constant or alternating. It has a narrow inner ring extended on one side and is locked onto the shaft by tightening two set screws on the inner ring, making it easy to mount. The units are compliant with North American standards.
- Standard centre height
- Ready to mount
- Lubricated and sealed bearing
- Quick locking onto the shaft
- Narrow inner ring for tight operating spaces
SKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2271865
Brand
Browning
Model
767676
#126912
Brand
Dodge
Model
P2B-VSC-012
#326696
Brand
SKF Bearing
Model
SY 3/4 RM
#5077218
Brand
Timken
Model
SAS 3/4
#792825
Brand
AMI Bearings
Model
BP204-12
#276869
Brand
NTN Bearing
Model
ARP-3/4
| Brand | Jason Industrial |
| Model | 10/C330 |
| Brand | Mitsubishi Electric |
| Model | A1SY80 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-587162 |
SKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF