We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF P2BM 300-TF is a 3-inch shaft 2-bolt pillow block bearing unit with set screw locking. The cast-iron medium-duty housing supports a pre-lubricated insert bearing. Designed for conveyor head shafts, fan supports, and general industrial drives.
MODEL P2BM 300-TF
$357.03 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
For material handling applications
Attachment Bolt Diameter
19.05 mm
Basic Dynamic Load Rating
72.8 kN
Basic Static Load Rating
53 kN
Bearing Material
Bearing steel
Bearing Sealing
Seal and flinger on both sides
Bore Type
Cylindrical
Centre Distance Between Bolt Holes
231.78 mm
Centre Height (pillow Block)
88.9 mm
Coating
Without
Fastening Bolt Hole Type
Plain
Grease Fitting
With
Hexagonal Key Size for Set Screw
5.556 mm
Housing
Cast iron
Housing Overall Width
77.8 mm
Housing Type
Pillow block
I.D.
3 in
Inner Ring Retaining Feature
Set screws
Limiting Speed
2400 r/min
Lubricant
Grease
Number of Bolt Holes for Fasteners
2
Pack Height
310 mm
Pack Length
187 mm
Pack Width
93 mm
Relubrication Hole
With
Rubber Seating Ring
Without
Sealing Type
Contact, standard
Set Screw
7/16-20 UNF
Set Screw Tightening Torque
28.5 N·m
Shaft Diameter
76.2 mm
Total Bearing Width
77.8 mm
Unit Sealing
Without
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.
- Strong
- Designed for a constant and alternating rotation
- Ready to mount
- Lubricated and sealed bearing
- Quick locking onto the shaft
- Cost-effective
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2259848
Brand
SealMaster
Model
MP-48
#131806
Brand
Dodge
Model
P2B-SCM-300-NL
#218328
Brand
IPTCI Bearing
Model
UCPX 15 48
#2926
Brand
AMI Bearings
Model
UCPX15-48
#2491643
Brand
Moline Bearing
Model
UCPX15-48
#607486
Brand
PEER Bearing
Model
UCPX15-48
#2207014
Brand
PTI
Model
UCPX15-48
| Brand | E-T-A |
| Model | 2210-T220-K0F2-H231-12A |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF