We never sell your data to third parties
SKF CMPT 2310T is a low profile integral cable accelerometer for vibration monitoring. Designed for industrial machinery condition monitoring, this sensor provides reliable vibration data for predictive maintenance applications.
MODEL CMPT 2310T
$871.56 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Acceleration and temperature sensor with integral, braided cable and side exit, for heavy duty environments
This physically rugged combined accelerometer and temperature sensor is optimized for use in heavy-duty environments. It is applied in industries such as Mining, Mineral Processing and Cement, where it can withstand dust, mud and flying debris, as well as high levels of vibration. The sensor is intended for use with all SKF on-line surveillance systems.
- Rugged sensor for heavy-duty environments
- Measures both acceleration and temperature
- Sensitivity optimized for use in multiple applications
- Low profile for applications where space is limited
- Corrosion resistant and encapsulation sealed
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Harwal |
| Model | .625 x 1.250 x .250BDLV |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF