We never sell your data to third parties
Dodge 141752 TB-SCEZ-104S-SHSS-NL MOD tapped-base pillow block bearing with 1-1/4" bore, 65 degree set screw locking, stainless steel housing and insert, E-Z Kleen design, QuadGuard seal, 206 series, no-lube sealed for life, corrosion resistant. 1-1/4" bore Tap Based Ball Bearing with Set Screw locking used in Washdown applications
MODEL TB-SCEZ-104S-SHSS-NL MOD
Contact supplier for technical support on: +1-864-284-5700
$503.28 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Washdown
Ball bearing series
206 series
Base to center height
1.5200 in, 38.608 mm
Bearing Series
206 series ball bearing (smaller ring size)
Bearing type
Ball, ball
Bolt Diameter
0.4375 in
Bolt to bolt max
3.0000 in, 76.2 mm
Bolt to bolt min
3.0000 in, 76.2 mm
Bore
1 1/4 in
Bore length
1.5200 in, 38.608 mm
Bore Size
1-1/4" shaft diameter
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Greasable
No
High temp
No
Housing construction
Solid
Housing material
Stainless steel
Housing Material
304 stainless steel cast housing
Housing option
Stainless steel
Housing type
Tapped-base pillow block
Housing Type
Tapped-base pillow block
Insert material
Stainless steel
Insert Material
Stainless steel insert
Insert option
Stainless steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication
No-lube sealed
Lubrication type
Grease
Product Line
E-Z Kleen series
Relubrication
No
Seal option
QuadGuard seals with flingers
Seal type
Triple-lip contact
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.2500 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
Yes
Type
Tap based
- Housing Type: Tapped-base pillow block with threaded mounting holes
- Bore Size: 1-1/4" (31.75mm) shaft diameter
- Locking Method: 65 degree set screw locking for maximum holding force
- Housing Material: 304 stainless steel cast housing for corrosion resistance
- Insert Material: Stainless steel insert for full corrosion protection
- Product Line: E-Z Kleen series for washdown environments
- Bearing Series: 206 series ball bearing (smaller ring size)
- Seal Type: QuadGuard triple lip seal with stainless rubberized flinger
- Lubrication: No-lube sealed for life, pre-greased
- Expansion Type: Non-expansion (fixed) design
- Applications: Food processing, pharmaceutical, chemical, marine applications requiring corrosion resistance
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123305
Brand
Dodge
Model
F4B-SC-015-NL
#791267
Brand
Dodge
Model
F4B-SCEZ-100-PSS
#791631
Brand
Dodge
Model
F4B-SCEZ-012-PSS
#135836
Brand
Dodge
Model
455840
#5904752
Brand
Dodge
Model
TB-SCEZ-104S-SHSS-NL MOD
| Brand | Eklind |
| Model | 92630 |
| Brand | G & G |
| Model | 147-5000 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/