We never sell your data to third parties
Dodge 138660 F4B-DLEZ-40M-SHCR-DRY four-bolt flange mounted ball bearing with 40mm bore, D-Lok E-Z Kleen concentric collar locking, standard duty, and QuadGuard seal with flingers. Stainless steel housing and corrosion-resistant insert for washdown environments. Non-expansion, relubricatable, dry application design.
MODEL F4B-DLEZ-40M-SHCR-DRY
Contact supplier for technical support on: +1-864-284-5700
$338.08 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Washdown
Ball bearing series
208 series
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
4.0000 in, 101.6 mm
Bolt to bolt min
4.0000 in, 101.6 mm
Bore
40mm
Bore Diameter
40mm (208 series)
Bore length
2.0100 in, 51.054 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed) bearing
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Stainless steel
Housing option
Stainless steel
Housing type
Four-bolt flange
Insert material
Plated steel
Insert Material
Corrosion resistant bearing insert
Insert option
Corrosion resistant
Insert type
Ball Bearing
Locking
Concentric collar
Relubrication
Yes
Seal option
QuadGuard seals with flingers
Seal type
Triple-lip contact
Seal Type
QuadGuard seals
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft diameter
40.0000 mm
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
Yes
Type
4-bolt flange
Specifications
- Catalog Number: 138660
- Engineering Number: F4B-DLEZ-40M-SHCR-DRY
- Housing Type: 4-Bolt Flange
- Bore Size: 40mm (40mm)
- Locking Type: Concentric Collar
- Duty Rating: Standard Duty
- Expansion Type: No
- Seal Type: QuadGuard seals with Flingers
- Modifications: Stainless Housing Corrosion Resistant, Dry Application
- Weight: 3.8700 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#132951
Brand
Dodge
Model
F4B-SCEZ-40M-SHCR
#132897
Brand
Dodge
Model
F4B-SCEZ-40M-PCR
#5903844
Brand
Dodge
Model
P2B-SCFS-40M-SHFS
#5003353
Brand
Dodge
Model
P2B-SCEZ-40M-SHSSS
#5903800
Brand
Dodge
Model
F4B-SCFS-40M-SHFS
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/