We never sell your data to third parties
$10.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Basic Dynamic Load Rating
29.6 kN
Basic Static Load Rating
16 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
Snap ring (fitted)
Bore Diameter
30 mm
Bore Type
Cylindrical
Cage
Sheet metal
Coating
Without
Filling Slots
Without
Limiting Speed
13000 r/min
Lubricant
None
Matched Arrangement
No
Number of Rows
1
O.D.
72 mm
Pack Height
86 mm
Pack Length
84 mm
Pack Width
25 mm
Radial Internal Clearance
C3
Reference Speed
20000 r/min
Relubrication Feature
Without
Sealing
Without
SKF Performance Class
SKF Explorer
Tolerance Class
Class P6 (P6)
Width
19 mm
- Radial/Deep Groove Ball Bearing - Round Bore
- 30 mm ID
- 72 mm OD
- 19 mm Width
- Open
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Telemecanique |
| Model | XS5L81PA140S |
| Brand | Marathon Electric |
| Model | 404TSTDCD4002 |