We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN 6204 is a 62 series single-row deep groove ball bearing with a 20 mm straight bore. This open bearing is designed for high-speed operation and accommodates radial and moderate axial loads. Suitable for electric motors, pumps, fans, and general industrial machinery. 6200 Open Bearing
6204 and 6204C3
MODEL 6204
Koyo Bearing
$10.09
SKF Bearing
$14.34
Timken
$13.69
NTN Bearing
$13.64
Call to confirm
NSK Bearings
$12.84
In stock
Nachi Bearing
$6.27
In stock
FAG Bearing
$12.84
This vendor has a minimum order quantity of 6. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
$13.64 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 6
Typically Ships in: 1 day
Returnable:No
Clearance
CN
Enclosure
Open
Height
1.85
I.D.
20 mm
Length
1.85
Material
Steel
O.D.
47 mm
Width
0.5512
Technical Specifications
Type | Deep Groove Ball Bearing |
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Oil | 18000 RPM |
Limiting Speed - Grease | 16000 RPM |
Seal Type | None |
Seal Material | None |
Precision | Class 0 |
Configuration | One |
Factor | 13.2 |
Radial Internal Clearance | CN |
Static Load Rating | 1500 lbf6650 N6.65 kN |
Dynamic Load Rating | 2880 lbf12800 N12.80 kN |
Enclosure | Open |
| 0.234 lb0.106 kg | |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 0.7874 in20.000 mm |
D | 1.8504 in47.000 mm |
B | 0.5512 in14.000 mm |
r | 0.0394 in1.000 mm |
r1 | 0.0197 in0.500 mm |
da min | 0.9843 in25.000 mm |
da max | 1.1024 in28.000 mm |
Da max | 1.6535 in42.000 mm |
ras max | 0.0394 in1.000 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Cleveland |
| Model | C95057 |