We never sell your data to third parties
Dodge 056744 P2B-SC-25M-NL two-bolt pillow block bearing with 25mm bore, 65 degree setscrew locking, cast iron housing, normal duty, factory pre-greased no-lube sealed for life, 205 series ball bearing, non-expansion design.
MODEL 056744
Contact supplier for technical support on: +1-864-284-5700
$88.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ball bearing series
205 series
Base to center height
1.4400 in, 36.576 mm
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
4.5000 in, 114.3 mm
Bolt to bolt min
3.6900 in, 93.726 mm
Bore length
1.3400 in, 34.036 mm
Bore Size
25mm metric bore
Duty Rating
Normal duty
Expansion capability
Non-expansion (fixed)
Greasable
No
Housing construction
Solid
Housing material
Cast iron
Housing type
Two-bolt pillow block
Insert material
Steel
Locking
65 degree setscrew
Lubrication type
Grease
Max Speed
4500 rpm
Mounting
Non-expansion (fixed)
Sensor ready
Adapter required
Series
205 series ball bearing insert
Shaft attachment
Setscrew
Shaft diameter
25.0000 mm
Standoff housing
No
Static load capacity
1769 lbf, 7868.904 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#6423543
Brand
Dodge
Model
056744
#792186
Brand
Dodge
Model
128364
#123285
Brand
Dodge
Model
F2B-SC-100
#131201
Brand
Dodge
Model
F2B-SC-25M
#128776
Brand
Dodge
Model
F2B-SC-40M
| Brand | Cutler Hammer |
| Model | ECC03C1A4A |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/