We never sell your data to third parties
Dodge 076298 P2B-SCMED-35M two-bolt pillow block bearing with 35mm bore, 65 degree set screw locking, medium duty extreme rated, cast iron housing, QuadGuard seal, 208 series ball bearing, non-expansion fixed mount for industrial applications 35mm bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in Dirty & Dusty Environment applications
MODEL P2B-SCMED-35M
Contact supplier for technical support on: +1-864-284-5700
$159.47 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Dirty & dusty environment
Ball bearing series
208 series
Base to center height
2.1300 in, 54.102 mm
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
5.8800 in, 149.352 mm
Bolt to bolt min
5.1800 in, 131.572 mm
Bore
35mm
Bore length
1.9400 in, 49.276 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
35
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
35.0000 mm
Standoff housing
No
Static load capacity
4475 lbf, 19905.792 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing: Two-bolt pillow block, cast iron construction
- Bore Size: 35mm (metric)
- Locking: 65 degree set screw for maximum holding force
- Duty Rating: Medium duty extreme (SCMED) with enhanced load capacity
- Series: 208 series ball bearing insert
- Seal: QuadGuard triple lip seal with stainless rubberized flinger
- Mount Type: Non-expansion (fixed) for shaft positioning
- Material: Grade 10 balls, synthetic grease, anti-rotation pin
- Applications: Heavy-duty industrial, conveyor systems, pump drives
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#791381
Brand
Dodge
Model
P2B-SCMED-35M
#792192
Brand
Dodge
Model
128366
#132908
Brand
Dodge
Model
P2B-SCEZ-107-PCR
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/