We never sell your data to third parties
Dodge 076326 FC-SCMED-35M flanged cartridge bearing with 35mm bore, set screw medium duty locking, cast iron housing, QuadGuard seals with flingers. Non-expansion design for fixed shaft positioning applications. 35mm bore 4-Bolt Piloted Flange Ball Bearing with Set Screw locking used in Dirty & Dusty Environment applications
MODEL FC-SCMED-35M
Contact supplier for technical support on: +1-864-284-5700
$189.89 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Dirty & dusty environment
Ball bearing series
208 series
Bearing type
Ball, ball
Bolt circle
4.3800 in, 111.252 mm
Bolt Diameter
0.4375 in
Bore
35mm
Bore length
1.9400 in, 49.276 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max Speed
3500 RPM
Pilot depth
0.4400 in, 11.176 mm
Pilot diameter
3.6250 in, 92.075 mm
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
35.0000 mm
Standoff housing
No
Static load capacity
4475 lbf, 19905.792 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: Flanged Cartridge (FC) - Round piloted flange with bolt circle
- Bore Size: 35mm
- Locking Method: Set Screw with 65 degree angle for maximum holding power
- Duty Rating: Medium Duty (SCMED) for heavier loads than standard normal duty
- Housing Material: Cast Iron Class 25/30 for general purpose applications
- Bearing Series: 208 Series
- Sealing: QuadGuard triple lip seals with stainless rubberized flingers
- Configuration: Non-Expansion (Fixed) for shaft positioning
- Max Speed: 3500 RPM
- Applications: Surface mount installations requiring piloted registration and bolt circle mounting
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#791381
Brand
Dodge
Model
P2B-SCMED-35M
#128758
Brand
Dodge
Model
P2B-SC-35M
#133450
Brand
Dodge
Model
F2B-SC-35M
#132453
Brand
Dodge
Model
P2B-DLM-35M
#791621
Brand
Dodge
Model
FC-SCMED-35M
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/