We never sell your data to third parties
AMI UCLP206-20NP low base pillow block bearing features 1-1/4" bore with set-screw locking, nickel-plated cast iron housing for corrosion resistance, chrome steel insert, and wide inner ring design for normal duty applications.
MODEL UCLP206-20NP
Contact supplier for technical support on: 800 882 8642
$61.47 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Covers
No
Duty
Standard
Expansion
No
High Temp
212f
Housing
Nickel Plated Cast Iron
HTS code
8483.20.40.40
I.D.
1 1/4 in
Insert Material
Bearing steel
Insert Type
Ball Bearing
Locking
Set screw
Relubrication
Yes
Seal
Contact Seal with Slinger
Type
Low Base Pillow Block
- Housing Type: Low Base Pillow Block
- Bore Diameter: 1-1/4" (31.75mm)
- Locking Type: Set-Screw
- Housing Material: Nickel-Plated Cast Iron
- Insert Material: Chrome Steel
- Inner Ring: Wide Design
- Duty Rating: Normal
- Series: 200 Series
- Corrosion Protection: Nickel Plating
- Weight: 2.86 lbs
SKU: 15063
Ami bearings
I've been using AMI bearings for several years now and have had zero problems. There made in Japan, so seem remarkably high quality but half the price of NTN.
Read moreSKU: 16609
Quality exactly as expected
Fair price for the product, quick lead time, good service.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Gates Rubber |
| Model | E1400MXL019 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-401685 |
| Brand | Gates Rubber |
| Model | E218L100 |
| Brand | Bunting Bearings |
| Model | FF110203 |
SKU: 15063
Ami bearings
I've been using AMI bearings for several years now and have had zero problems. There made in Japan, so seem remarkably high quality but half the price of NTN.
Read moreSKU: 16609
Quality exactly as expected
Fair price for the product, quick lead time, good service.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/