We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Link-Belt UBG2E20NL 10415848 UBG200 unmounted ball bearing insert, 1-1/4" bore, set screw locking, C3 clearance, Buna single lip contact seal, nylon retainer, standard duty. Fits 200 series Link-Belt housings.
MODEL 10415848
Contact supplier for technical support on: 800-626-2120
$70.20 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Available seal type
N Lip Seal; H Labyrinth Seal
Bearing Type
Standard Duty
Bore length (in)
1 9/16 in
Bore size (in)
1.25 in
C dynamic load rating
4390 lb
Co static load rating
2530 lb
Distance from Bearing Centerline to Centerline of Lube Hole (in)
0.202 in
Distance from Inner Ring Long Hub Face to Centerline of Setscrew (in)
0.22 in
Height
2.00
Inner ring hub diameter (in)
1.587 in
Length
3.00
Locking Type
Set screw
Lubrication type
EXXON RONEX MP STD
Maximum Speed (RPM)
8000 RPM
Maximum Temperature (C)
107 C
Maximum Temperature (F)
225 F
Mounted clearance
C3 standard
Outer Ring Fillet Radius (in)
0.039 in
Outer Ring Width (in)
0.7087 in
Outside diameter (in)
2.4409 in
Primary seal
BUNA single lip contact seal
Retainer type
Nylon
Service instructions
BR3-007 LB 200 ball-300 ball
Setscrew torque (in-lbs)
87-92 in/lbs
Short Hub Length (in)
0.6094 in
Size code
206
Thread
#1/4-28
Type of seal
N lip seal
Unit of dimension
in
Vibration frequency fundamental train
0.0067 cps
Vibration frequency inner ring defect
0.0905 cps
Vibration frequency outer ring defect
0.0595 cps
Vibration frequency roller spin
0.0385 cps
Volume
0.078
Volume unit
GLL
Width
3.00
1 1/4" Unmounted, Non Relubricatable, Cylindrical OD, Ball Bearing, Standard Duty, Setscrew Locking, Single Lip Contact Seal
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Slew ring bearings, also referred to as slewing bearings, slewing rings, or turntable bearings, are forms of bearings designed to allow rotational motion between several components.
Read More
| Brand | Hubbell Wiring |
| Model | SNAP2152ALLTRA |
| Brand | Gates Rubber |
| Model | SPB1800P |