We never sell your data to third parties
Smith Bearing CR-1-3/4-C-SS is a stainless steel stud-type cam follower with a 1-3/4" roller OD. It features a crowned outer ring for misalignment accommodation and is sealed to protect against contaminants. Ideal for corrosive environments requiring corrosion resistance.
MODEL CR-1-3/4-C-SS
Contact supplier for technical support on: 800-932-0076
$113.07 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Cam Follower Needle Roller Bearings The CR-1-3/4-C-SS Stainless Steel Cam Follower from Smith Bearings is an advanced bearing solution designed for high-performance applications in both aerospace and industrial environments. This cam follower is engineered to provide exceptional load capacity and durability, ensuring reliable operation in demanding conditions.
Key Features
| Material | Constructed from high-grade stainless steel, offering superior resistance to corrosion and enhanced longevity in harsh environments. |
|---|---|
| Design | Features a crowned raceway that reduces stress concentrations and enhances rolling performance, allowing for smoother operation and extended service life. |
| Size | The bearing has a 1-3/4 inch outer diameter, making it compatible with a wide range of applications. |
| Load Capacity | Specifically designed to handle high-thrust loads, making it suitable for heavy-duty applications. |
| Self-Lubricating Options | Available with engineered plastic bushings for applications requiring reduced maintenance and operational efficiency. |
Applications
| Aerospace | Approved for use in critical aerospace applications, including engines and airframes, where reliability and precision are paramount. |
|---|---|
| Industrial Equipment | Ideal for use in various machinery and equipment where high load-bearing capacity and corrosion resistance are essential, such as conveyor systems and automated assembly lines. |
| Corrosive Environments | Suitable for use in environments where exposure to chemicals and moisture could compromise the integrity of standard bearings. |
Benefits
| Enhanced Durability | The stainless steel construction ensures resistance to rust and corrosion, significantly extending the lifespan of the bearing in challenging environments. |
|---|---|
| Improved Performance | The crowned design minimizes wear and reduces friction, leading to smoother operation and less energy consumption. |
| Versatile Use | The CR-1-3/4-C-SS is versatile enough to be used in a variety of applications, offering flexibility and reliability for engineers and designers. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | RAB Lighting |
| Model | A19-6-E26-830-ND |
| Brand | Wiegmann |
| Model | HW-141208CHQR |
| Brand | Gates Rubber |
| Model | TL26H100 |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.