We never sell your data to third parties
PEER PER.203RYY2 Special Ball Bearing With Integral Sealing
MODEL PER.203RYY2
$8.76 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Basic Dynamic Load Rating
9.57 kN
Basic Static Load Rating
4.79 kN
Bore Diameter
16.256 mm
O.D.
40 mm
Pack Height
19 mm
Pack Length
64 mm
Pack Width
64 mm
Width
18.288 mm
These special single row deep groove ball bearings with integral sealing are designed mainly for agricultural applications. They have a cylindrical outside surface and a round bore. They accommodate radial loads and are easy to mount. The integral sealing can significantly prolong bearing service life and reduce maintenance efforts.
- Designed mainly for agricultural applications
- Versatile, robust design
- Accommodate radial and small axial loads
- Integral sealing prolongs bearing service life
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Boston Gear |
| Model | F842B-50K-B5 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-494090 |
