Categories

Add products to your shopping cart

#1132555

309RDT1-1/2

Image for Illustration purposes only. Actual product may vary

  • Brand:
  • Model: 309RDT1-1/2
  • Condition: NEW
  • SKU: 1132555

MRC 309RDT1-1/2 ANGULAR CONTACT BALL BRGS

View additional description
  • Typically ships in: 1 day
  • Weight: 2.4 lb

$621.81 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 2.374 lbs.
Product Name: Angular Contact Ball Bearing
Description: Single Row Angular Contact Bearing, 45 mm ID x 100 mm OD x 25 mm Wide, Open, Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0), 15° Contact Angle
Specifications
Inch/Metric Metric Bore Bore Type Round Bore
I.D. 45 mm O.D. [Min]  
O.D. [Max]   O.D. 100 mm
Width [Min]   Width [Max]  
Width 25 mm Enclosure Open
Rows of Balls Single Material Steel
O.D. Type Straight Bearing Type Angular Contact
Precision Standard Radial Internal Clearance Specification Normal Clearance
Ambient Temperature Range [Min]   Ambient Temperature Range [Max]  
Ball Material Steel Cage Type Metal
Capacity Standard Capacity Contact Angle 15°
Guide Type   Lubrication  
Outer Ring Width 25 mm Precision Level Standard (ABEC 1)
Preload Level None Seal Material None
Seal Type Unsealed Seal Width  
Dynamic Load Rating 13200 lbf Static Load Rating [Max] 9100 lbf
Ball Dia.   Bearing Design  
Bore B   Cage Material Steel
Collar No.   Collar O.D.  
Collar Width   Corner Radius [Min]  
Eccentric Collar Offset   Fillet Radius 1 1/2 mm
Flange O.D. [Max]   Flange O.D.  
Flange Width [Max]   Flange Width  
Flush Ground   Housing Shoulder Diameter [Min]  
Housing Shoulder Diameter [Max]   Housing Shoulder Diameter  
Industry Standard Part #   Inner Ring O.D.  
Inner Ring Offset   Inner Ring Width 25 mm
Internal Design   Limiting Speed  
Limiting Speed - Grease 6700 rpm Limiting Speed - Oil 8000 rpm
Limiting Speed - Sealed   Locking Device No Locking Device
Lube Hole Center   Lubricant Oil Preservative
Misalignment Range   No. in Set Single Bearing
No. of Balls   O.D. (B)  
Outer Ring   Outer Ring Inner Diameter  
Outer Ring Size   Peak Running Torque (mg-mm)  
Peak Starting Torque (mg-mm)   Pre Lubricant  
Preload Amount   Radial Internal Clearance Normal
Radial Load Rating [Max]   Radial Rigidity (lbf/µm)  
Reference Speed   Seal O.D.  
Seal Protection Width   Seating Washer  
Series   Set Screw Offset  
Set Screw Size   Shaft Shoulder Diameter [Min]  
Shaft Tolerance   Snap Ring No Snap Ring
Snap Ring O.D.   Snap Ring Offset  
Snap Ring Thickness   Special Features  
Stamping   Static Thrust Load Rating [Max]  
Temperature Range [Min]   Temperature Range [Max] 450 °F
Use With      
Product Information
General
Bores range in diameter from 12mm to 280 mm 15° angular contact bearings with one heavy race shoulder and one counterbored race shoulder on the outer ring Incorporates a greater number of balls than in the deepgroove nonfilling notch bearing Normally furnished with ABMA C3 radial clearance Cage types and materials available are two-piece pressed steel, ball riding, bent prong cages

Documents

Specifications:

Locking None
I.D. 1.772
Cage Metal
O.D. 3.937
Bearing Type Angular Contact
Enclosure Open