Categories

Add products to your shopping cart

#1132926

5208CZZ

Image for Illustration purposes only. Actual product may vary

MRC 5208CZZ DOUBLE ROW BALL BRGS

View additional description
  • Typically ships in: 1 day
  • Weight: 1.4 lb

$65.67 Each

MRC Bearing items are expected to have a price increase after 03/16/2020

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Nov. 4, 2018

Things break. No matter how you handle them, chances are that they will fail at some point. The same holds when it comes to bearing. However, understanding the main problems that affect bearings can help you to prevent the damage, reduce wear and tear, enhance performance, and extend their lifespan.

Read More

 

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 1.376 lbs.
Product Name: 5200-C, 5200-SB Light Series Bearing
Description: 40 mm ID x 80 mm OD x 1 3/16" Wide; Double Sealed; No Snap Ring; Standard Capacity; Double Row Ball Bearing
Specifications
Inch/MetricMetric BoreBore TypeRound Bore
I.D.40 mmO.D. [Min]
O.D. [Max]O.D.80 mm
Width [Min]Width [Max]
Width30.1625 mmEnclosureDouble Sealed
Rows of BallsDoubleMaterialSteel
O.D. TypeStraightBearing TypeAngular Contact
PrecisionStandardRadial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]Ambient Temperature Range [Max]
Ball MaterialSteelCage TypeMetal
CapacityStandard CapacityContact Angle30°
Guide TypeLubrication
Outer Ring Width1 3/16 inPrecision LevelStandard (ABEC 1)
Preload LevelNoneSeal MaterialRubber
Seal TypeContact SealsSeal Width
Dynamic Load Rating10100 lbfStatic Load Rating [Max]7640 lbf
Ball Dia.Bearing Design
Bore BCage MaterialSteel
Collar No.Collar O.D.
Collar WidthCorner Radius [Min]
Eccentric Collar OffsetFillet Radius1 mm
Flange O.D. [Max]Flange O.D.
Flange Width [Max]Flange Width
Flush GroundHousing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]Housing Shoulder Diameter
Industry Standard Part #Inner Ring O.D.
Inner Ring OffsetInner Ring Width1 3/16 in
Internal DesignLimiting Speed
Limiting Speed - Grease5600 rpmLimiting Speed - Oil7500 rpm
Limiting Speed - Sealed5600 rpmLocking DeviceNo Locking Device
Lube Hole CenterLubricantChevron SRI-2
Misalignment RangeNo. in SetSingle Bearing
No. of BallsO.D. (B)
Outer RingOuter Ring Inner Diameter
Outer Ring SizePeak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)Pre Lubricant
Preload AmountRadial Internal ClearanceNormal
Radial Load Rating [Max]Radial Rigidity (lbf/µm)
Reference SpeedSeal O.D.
Seal Protection WidthSeating Washer
SeriesSet Screw Offset
Set Screw SizeShaft Shoulder Diameter [Min]
Shaft ToleranceSnap RingNo Snap Ring
Snap Ring O.D.Snap Ring Offset
Snap Ring ThicknessSpecial Features
StampingStatic Thrust Load Rating [Max]
Temperature Range [Min]-22 °FTemperature Range [Max]250 °F
Use With  
Product Information
Applications
  • Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
  • Bearings will take heavy radial loads and axial loads equally in either direction
  • Features
  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring
  • Compliances
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Specifications:

    Locking None
    I.D. 1.575
    Cage Metal
    O.D. 3.15
    Bearing Type Angular Contact
    Enclosure Double Sealed

    Return policy

    Item must be unused.

    Item must be in it's original package.

    Product's availability

    State of California Proposition 65 Product Warning