We never sell your data to third parties
NTN MLE7000CVDUJ74S high-precision duplex angular contact ball bearing with 10 mm straight bore. Double sealed enclosures and phenolic cage for high-speed, low-torque applications. Constructed from high carbon chrome steel for machine tool spindles and precision rotating assemblies.
MODEL MLE7000CVDUJ74S
$516.38 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
2B
0.6299 in
B (in)
0.3150
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Phenolic
Cage material
Phenolic
Cage Type
Stratified
Cage type
Stratified
Contact angle
17 º
d (in)
0.3937
D (in)
1.0236
D1
0.7677 in
d2
0.5591 in
d3
0.5787 in
D4
0.7913 in
Enclosure
Double Sealed
I.D.
10 mm
Material
High carbon chrome steel
O.D.
26 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
ISO class 4
r2 max
0.0118 in
r3 max
0.0059 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Non-Contact
Seal type
Non-Contact
Type
Angular Contact Ball Bearing
Technical Specifications
Type | Angular Contact Ball Bearing |
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Stratified |
Cage Material | Phenolic |
Ball Material | Steel |
Seal Type | Non-Contact |
Seal Material | Nitrile Rubber |
Precision | ISO Class 4 |
Enclosure | Double Sealed |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 0.3937 in10.000 mm |
D | 1.0236 in26.000 mm |
B | 0.3150 in8.000 mm |
2B | 0.6299 in16.000 mm |
r2 max | 0.0118 in0.300 mm |
r3 max | 0.0059 in0.150 mm |
Contact Angle | 17 |
d2 | 0.5591 in14.200 mm |
d3 | 0.5787 in14.700 mm |
D1 | 0.7677 in19.500 mm |
D4 | 0.7913 in20.100 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
