Categories

Subtotal

View cart
Add products to your shopping cart
#2789677

Image for Illustration purposes only. Actual product may vary

YAG-16 Single Row Yoke Aerospace Bearings

$120.00 Each

NEW

  • Typically ships in: 1 day
  • Weight: 0.5 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description

Specifications:
(B) Roller O.D. 1.7500
(C) Outer Race Width 1.125
(A) Bore 1.0000
(W) Overall Width 1.250
Limit Load Rating (lbf) 33900
Aircraft Static Capacity (lbf) 50900
(A) Bore Tolerance +.0000/-.0007
(d) Min. Clamp Dia. 1.375
(E) End Ring Dia. 1.625
SMITH Bearing Number YAG-16
(P) Inner Ring Lube Width 3/8
(H) Outer Race Groove Width 5/32
(W) Overall Width Tolerance +.000/-.005
(D) Radius or 45° Chamfer 0.032
Recomm. Housing Bore Dia. Press Fit Max. 1.7499
Recomm. Housing Bore Dia. Press Fit Min. 1.7505
Recomm. Housing Bore Dia. Slip Fit Max. 1.7491
Recomm. Shaft Dia. Press Fit Max. 1.0002
Recomm. Shaft Dia. Press Fit Min. 0.9997
Recomm. Shaft Dia. Slip Fit Max. 0.9994
Recomm. Shaft Dia. Slip Fit Min. 0.9989
(C) Outer Race Width Tolerance +.000/-.005
Weight (lbs) 0.510
(B) Roller O.D. Tolerance +.0000/-.0010

Documents

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.

File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf

ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.

ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:

a. Product brand name

b. Quantity

c. IDC-USA’s product identification number

d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.

AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.

Product Qualification: All products returned must be:

a. On the current price list

b. In good resale condition

c. In the original packaging

d. Purchased from IDC-USA within 3 years of the return

e. Stock items only; no special order items

f. Only those items which have been approved

VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.

RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.

FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.

 

Product's availability

State of California Proposition 65 Product Warning