We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Timken IR-606832 is a single row cylindrical roller bearing (CRB) for general industrial applications. This bearing is part of the <12 inch outside diameter class, suitable for radial loads and limited axial float in machinery such as electric motors and gear reducers.
MODEL IR-606832
$105.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
2.54 mm Dimension
3.750 in
95.217 mm Shaft diameter
3.750 in Used with Bearing Designation:HJ-688432
95.237 mm Min Interference fit
3.7505 in
95.25 mm Max Interference fit
3.7511 in
95.263 mm Min loose transition fit
3.7487 in
95.278 mm Max loose transition fit
3.7495 in
Chamfer
0.10 in
Chamfer r
0.10 in 2.54 mm
Dimension B
2 in 50.8 mm
Dimension D
3.750 in 95.25 mm
Dimension F
4.25 in 107.95 mm
Max. Interference Fit
3.7511 in 95.278 mm
Max. Loose Transition Fit S
3.7495 in 95.237 mm
Min. Interference Fit
3.7505 in 95.263 mm
Min. Loose Transition Fit S
3.7487 in 95.217 mm
Shaft Diameter
3.750 in
Used with Bearing Designation
HJ-688432
- Ideal choice where the shaft is not practical to use as inner raceway.
- Designed to meet established inch tolerances.
- Maximum shaft fillet radius cannot exceed inner-ring bore chamfer as shown.
- Optional centralized lubrication groove (bore) or through hole available – specify when ordering.
- Designed to be axially clamped against shoulder for loose transition fit on shaft.
- After mounting, for tight transition fit (keeping inner ring from rotating relative to shaft), inner-ring O.D. must not exceed raceway diameter on matching bearing.
- After mounting, if O.D. of inner ring exceeds the required raceway diameter for matching bearing, ring should be ground to proper diameter while mounted on shaft.
- Unmarked end of inner ring to be assembled against the shaft shoulder to ensure clearing the maximum allowable shaft fillet as indicated in tables shown.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Hubbell Wiring |
| Model | GFRST83SNAPLANA |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more