We never sell your data to third parties
NTN 7013CDB+25/G03UP-1 is a duplex angular contact ball bearing with a back-to-back arrangement, 65 mm straight bore, and open enclosure. It features a nylon cage and is constructed from high carbon chrome steel. Designed for high-precision applications requiring axial load capacity in both directions.
MODEL 7013CDB+25/G03UP-1
$1,279.11 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
2B
1.4173 in
B (in)
0.7087
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Nylon
Cage material
Nylon
Cage Type
Fiber Glass Reinforced
Cage type
Fiber glass reinforced
Configuration
Two
Contact angle
15 º
d (in)
2.5591
D (in)
3.9370
d1
3.0276 in
D1
3.4685 in
D2
3.6811 in
d2
2.9252 in
Da max
3.6614 in
da min
2.8346 in
Db max
3.7598 in
Enclosure
Open
I.D.
65 mm
Material
High carbon chrome steel
O.D.
100 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
Special precision
Preload
Special preload
r (in)
0.0433
r1
0.0236 in
r1as max
0.0236 in
ras max
0.0394 in
Type
Angular Contact Ball Bearing
Technical Specifications
| Type | Angular Contact Ball Bearing |
|---|---|
| Bore Type | Round |
| Material | High Carbon Chrome Steel |
| Cage Type | Fiber Glass Reinforced |
| Cage Material | Nylon |
| Ball Material | Steel |
| Precision | Special Precision |
| Configuration | Two |
| Preload | Special Preload |
| Enclosure | Open |
| Operating Temperature Range | -40 to 250 ºF / -40 to 120 ºC |
Dimensional Specifications
| d | 2.5591 in / 65.000 mm |
|---|---|
| D | 3.9370 in / 100.000 mm |
| B | 0.7087 in / 18.000 mm |
| 2B | 1.4173 in / 36.000 mm |
| d1 | 3.0276 in / 76.900 mm |
| d2 | 2.9252 in / 74.300 mm |
| D1 | 3.4685 in / 88.100 mm |
| D2 | 3.6811 in / 93.500 mm |
| r | 0.0433 in / 1.100 mm |
| r1 | 0.0236 in / 0.600 mm |
| Contact Angle | 15 º |
| da min | 2.8346 in / 72.000 mm |
| Da max | 3.6614 in / 93.000 mm |
| Db max | 3.7598 in / 95.500 mm |
| ras max | 0.0394 in / 1.000 mm |
| r1as max | 0.0236 in / 0.600 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Dixon Sanitary Fittings |
| Model | B32W-G250200P |
| Brand | Turck |
| Model | NI20NF-CP40-VP4X2 |