We never sell your data to third parties
NTN 6207C4 62 series single-row deep groove ball bearing with a 35 mm straight bore. Open enclosure, steel cage, and C4 clearance for applications requiring greater internal clearance than standard. Constructed from high carbon chrome steel for electric motors, pumps, and general rotating machinery.
MODEL 6207C4
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
$35.14 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable:No
B (in)
0.6693
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Steel
Cage material
Steel
Cage Type
Pressed
Cage type
Pressed
Configuration
One
d (in)
1.3780
D (in)
2.8346
Da max
2.5787 in
da max
1.7717 in
da min
1.6339 in
Dynamic Load Rating
6380 lbf
Dynamic load rating
6380 lbf
Enclosure
Open
Factor
13.8
I.D.
35 mm
Limiting Speed - Grease
9800 RPM
Limiting speed - grease
9800 RPM
Limiting Speed - Oil
11000 RPM
Limiting speed - oil
11000 RPM
Material
High carbon chrome steel
O.D.
72 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
Class 0
r (in)
0.0394
r1
0.0197 in
Radial Internal Clearance
C4
Radial internal clearance
C4
ras max
0.0394 in
Seal material
None
Seal type
None
Static Load Rating
3430 lbf
Static load rating
3430 lbf
Type
Deep Groove Ball Bearing
Technical Specifications
| Type | Deep Groove Ball Bearing |
|---|---|
| Bore Type | Round |
| Material | High Carbon Chrome Steel |
| Cage Type | Pressed |
| Cage Material | Steel |
| Ball Material | Steel |
| Limiting Speed - Oil | 11000 RPM |
| Limiting Speed - Grease | 9800 RPM |
| Seal Type | None |
| Seal Material | None |
| Precision | Class 0 |
| Configuration | One |
| Factor | 13.8 |
| Radial Internal Clearance | C4 |
| Static Load Rating | 3450 lbf15300 N15.30 kN |
| Dynamic Load Rating | 5800 lbf25700 N25.70 kN |
| Enclosure | Open |
| Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
| d | 1.3780 in35.000 mm |
|---|---|
| D | 2.8346 in72.000 mm |
| B | 0.6693 in17.000 mm |
| r | 0.0394 in1.000 mm |
| r1 | 0.0197 in0.500 mm |
| da min | 1.6339 in41.500 mm |
| da max | 1.7717 in45.000 mm |
| Da max | 2.5787 in65.500 mm |
| ras max | 0.0394 in1.000 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | NAE |
| Model | PE505UZ-300-6C-IN |
