We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN 6205LLUC3/LP03QT is a 62 series single-row deep groove ball bearing with a 25 mm straight bore. It features double rubber contact seals (NBR) for effective contaminant exclusion, a stamped steel cage, and C3 internal clearance for applications requiring thermal expansion accommodation. Constructed from high carbon chrome steel, it is suitable for electric motors, pumps, fans, and general rotating machinery.
MODEL 6205LLUC3/LP03QT
This vendor has a minimum order quantity of 3. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
$25.84 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 3
Typically Ships in: 1 day
Returnable:No
B (in)
0.5906
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Steel
Cage material
Steel
Cage Type
Pressed
Cage type
Pressed
Configuration
One
d (in)
0.9843
D (in)
2.0472
da max
1.2598 in
Da max
1.8504 in
Dynamic Load Rating
3480 lbf
Dynamic load rating
3480 lbf
Enclosure
Double Sealed
Factor
13.9
I.D.
25 mm
Limiting Speed - Grease
8900 RPM
Limiting speed - grease
8900 RPM
Material
High carbon chrome steel
O.D.
52 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
ISO class 0
r (in)
0.0394
r1
0.0197 in
Radial Internal Clearance
C3
Radial internal clearance
C3
ras max
0.0394 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
1760 lbf
Static load rating
1760 lbf
Type
Deep Groove Ball Bearing
Technical Specifications
Type | Deep Groove Ball Bearing |
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Grease | 8900 RPM |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Precision | ISO Class 0 |
Configuration | One |
Factor | 13.9 |
Radial Internal Clearance | C3 |
Static Load Rating | 1760 lbf7850 N7.85 kN |
Dynamic Load Rating | 3150 lbf14000 N14.00 kN |
Enclosure | Double Sealed |
Weight | 0.267 lb0.121 kg |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | JW Winco |
| Model | 817-5-5-3/8X16-CK |
| Brand | NoTrax |
| Model | 231R0048BU |
| Brand | Climax Metal |
| Model | ISCC-125-125 |
