We never sell your data to third parties
NTN 6203LLUAX13V42 is a 62 series single-row deep groove ball bearing with a 17 mm straight bore. It features double rubber contact seals (NBR) and a stamped steel cage. This bearing is pre-greased and suitable for electric motors, pumps, fans, and general rotating machinery.
MODEL 6203LLUAX13V42
This vendor has a minimum order quantity of 5. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
$15.09 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 5
Typically Ships in: 1 day
Returnable:No
B (in)
0.4724
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Steel
Cage material
Steel
Cage Type
Pressed
Cage type
Pressed
D (in)
1.5748
d (in)
0.6693
da max
0.9055 in
Da max
1.4173 in
da min
0.8268 in
Dynamic Load Rating
2380 lbf
Dynamic load rating
2380 lbf
Enclosure
Double Sealed
Factor
12.8
I.D.
17 mm
Limiting Speed - Grease
12000 RPM
Limiting speed - grease
12000 RPM
Material
High carbon chrome steel
O.D.
40 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
ISO class 0
r (in)
0.0236
r1
0.0197 in
Radial Internal Clearance
CN
Radial internal clearance
CN
ras max
0.0236 in
Seal Material
Polyacrylic
Seal material
Polyacrylic
Seal Type
Contact
Seal type
Contact
Static Load Rating
1030 lbf
Static load rating
1030 lbf
Type
Deep Groove Ball Bearing
Width
12 mm
Technical Specifications
Type | Deep Groove Ball Bearing |
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Grease | 12000 RPM |
Seal Type | Contact |
Seal Material | Polyacrylic |
Precision | ISO Class 0 |
Factor | 12.8 |
Radial Internal Clearance | CN |
Static Load Rating | 1030 lbf4600 N4.60 kN |
Dynamic Load Rating | 2160 lbf9600 N9.60 kN |
Enclosure | Double Sealed |
Weight | 0.128 lb0.058 kg |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 0.6693 in17.000 mm |
D | 1.5748 in40.000 mm |
B | 0.4724 in12.000 mm |
r | 0.0236 in0.600 mm |
r1 | 0.0197 in0.500 mm |
da min | 0.8268 in21.000 mm |
da max | 0.9055 in23.000 mm |
Da max | 1.4173 in36.000 mm |
ras max | 0.0236 in0.600 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.