We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN 6200Z/5C is a 62 series single-row deep groove ball bearing with a 10 mm straight bore. Features a single metal shield (Z) on one side for protection against contaminants while maintaining low friction. Suitable for electric motors, pumps, and general rotating machinery.
MODEL 6200Z/5C
This vendor has a minimum order quantity of 6. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
$12.02 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 6
Typically Ships in: 1 day
Returnable:No
B (in)
0.3543
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Steel
Cage material
Steel
Cage Type
Pressed
Cage type
Pressed
Configuration
One
D (in)
1.1811
d (in)
0.3937
Da max
1.0236 in
da max
0.6299 in
da min
0.5512 in
Dynamic Load Rating
1270 lbf
Dynamic load rating
1270 lbf
Enclosure
Single Shielded
Factor
26.0
I.D.
10 mm
Limiting Speed - Grease
25000 RPM
Limiting speed - grease
25000 RPM
Limiting Speed - Oil
30000 RPM
Limiting speed - oil
30000 RPM
Material
High carbon chrome steel
O.D.
30 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
ISO class 0
r (in)
0.0236
r1
0.0197 in
Radial Internal Clearance
CN
Radial internal clearance
CN
ras max
0.0236 in
Static Load Rating
535 lbf
Static load rating
535 lbf
Type
Deep Groove Ball Bearing
Technical Specifications
Type | Deep Groove Ball Bearing |
|---|---|
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Oil | 30000 RPM |
Limiting Speed - Grease | 25000 RPM |
Precision | ISO Class 0 |
Configuration | One |
Factor | 26.0 |
Radial Internal Clearance | CN |
Static Load Rating | 535 lbf2390 N2.39 kN |
Dynamic Load Rating | 1150 lbf5100 N5.10 kN |
Enclosure | Single Shielded |
Weight | 0.068 lb0.031 kg |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 0.3937 in10.000 mm |
|---|---|
D | 1.1811 in30.000 mm |
B | 0.3543 in9.000 mm |
r | 0.0236 in0.600 mm |
r1 | 0.0197 in0.500 mm |
da min | 0.5512 in14.000 mm |
da max | 0.6299 in16.000 mm |
Da max | 1.0236 in26.000 mm |
ras max | 0.0236 in0.600 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Martin Sprocket |
| Model | 9CTA14-10 |
| Brand | Krylon |
| Model | K01317A07 |
| Brand | Wichita Clutch |
| Model | 30004566 |
| Brand | Nord Gear |
| Model | SK1SM50-100-56C-RIGHT |
| Brand | Dupli-Color |
| Model | EDE160207 |