We never sell your data to third parties
NTN 62/22 is a single-row deep groove ball bearing with a 22 mm straight bore. This open bearing has no seals or shields, making it suitable for applications requiring high-speed operation with external lubrication. Used in electric motors, pumps, fans, and general rotating machinery.
MODEL 62/22
This vendor has a minimum order quantity of 3. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
$28.78 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 3
Typically Ships in: 1 day
Returnable:No
Clearance
CN
Enclosure
Open
Height
1.969
I.D.
22 mm
Length
1.969
Material
Steel
O.D.
50 mm
Width
0.5512
Technical Specifications
Type | Deep Groove Ball Bearing |
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Oil | 17000 RPM |
Limiting Speed - Grease | 14000 RPM |
Seal Type | None |
Seal Material | None |
Precision | Class 0 |
Configuration | One |
Factor | 13.5 |
Radial Internal Clearance | CN |
Static Load Rating | 1530 lbf6800 N6.80 kN |
Dynamic Load Rating | 2900 lbf12900 N12.90 kN |
Enclosure | Open |
Weight | 0.262 lb0.119 kg |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Vacon VFD |
| Model | VACON0100-3L-0018-2-HVAC-R02+IP54 |
