We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN 6022LLUC3/EM is a 60 series single-row deep groove ball bearing with a 110 mm straight bore. It features double rubber contact seals (LLU), a machined brass cage (EM), and C3 internal clearance. Designed for electric motors, pumps, fans, and general rotating machinery.
MODEL 6022LLUC3/EM
$419.83 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Axial Static Load Rating
16411 lbf
Axial static load rating
16411 lbf
B (in)
1.1020
Ball Material
Through Hardened Steel
Ball material
Through hardened steel
Bore Type
0
Bore type
0
Cage Material
Pressed Steel
Cage material
Pressed steel
Cage Type
Pressed
Cage type
Pressed
Clearance
C3
Configuration
One
D (in)
6.6930
d (in)
4.3310
Da max
6.3386 in
da max
4.9606 in
Dynamic Load Rating
20459 lbf
Dynamic load rating
20459 lbf
Enclosure
Full Contact Seal - Both Sides
Factor
15.6
Height
6.693
I.D.
110 mm
Length
6.693
Limiting Speed - Grease
2300 RPM
Limiting speed - grease
2300 RPM
Material
High carbon chrome steel
O.D.
170 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Outside Ring Type
0
Precision
ISO class 0
r (in)
0.0787
r1
0.0197 in
Radial Dynamic Load Rating
20458 lbf
Radial Internal Clearance
0
Radial internal clearance
0
ras max
0.0787 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
16412 lbf
Static load rating
16412 lbf
Type
Deep Groove Ball Bearing
Width
1.1024
Technical Specifications
Type | Deep Groove Ball Bearing |
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Grease | 2300 RPM |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Precision | ISO Class 0 |
Configuration | One |
Factor | 15.6 |
Radial Internal Clearance | C3 |
Static Load Rating | 16400 lbf73000 N73.00 kN |
Dynamic Load Rating | 18400 lbf82000 N82.00 kN |
Enclosure | Double Sealed |
Weight | 4.365 lb1.980 kg |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.