We never sell your data to third parties
NTN TS2-6307ZZC3/EM is a 6300 series single-row deep groove ball bearing with a 35 mm bore. It features double shielded steel seals, C3 internal clearance, and a machined brass cage. Constructed from high carbon chrome steel, it is suitable for electric motors, pumps, and general industrial rotating machinery.
MODEL TS2-6307ZZC3/EM
$74.26 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
B (in)
0.8268
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Steel
Cage material
Steel
Cage Type
Pressed
Cage type
Pressed
Configuration
One
D (in)
3.1496
d (in)
1.3780
Da max
2.8346 in
da max
1.8504 in
da min
1.6929 in
Dynamic Load Rating
8310 lbf
Dynamic load rating
8310 lbf
Enclosure
Double Shielded
Factor
13.1
I.D.
35 mm
Limiting Speed - Grease
10000 RPM
Limiting speed - grease
10000 RPM
Material
High carbon chrome steel
O.D.
80 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
ISO class 0
r (in)
0.0591
r1
0.0197 in
Radial Internal Clearance
C3
Radial internal clearance
C3
ras max
0.0591 in
Seal material
None
Seal type
None
Static Load Rating
4300 lbf
Static load rating
4300 lbf
Type
Deep Groove Ball Bearing
Technical Specifications
| Type | Deep Groove Ball Bearing |
|---|---|
| Bore Type | Round |
| Material | High Carbon Chrome Steel |
| Cage Type | Pressed |
| Cage Material | Steel |
| Ball Material | Steel |
| Limiting Speed - Grease | 10000 RPM |
| Seal Type | None |
| Seal Material | None |
| Precision | ISO Class 0 |
| Configuration | One |
| Factor | 13.1 |
| Radial Internal Clearance | C3 |
| Static Load Rating | 4300 lbf19100 N19.10 kN |
| Dynamic Load Rating | 7550 lbf33500 N33.50 kN |
| Enclosure | Double Shielded |
| Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
| d | 1.3780 in35.000 mm |
|---|---|
| D | 3.1496 in80.000 mm |
| B | 0.8268 in21.000 mm |
| r | 0.0591 in1.500 mm |
| r1 | 0.0197 in0.500 mm |
| da min | 1.6929 in43.000 mm |
| da max | 1.8504 in47.000 mm |
| Da max | 2.8346 in72.000 mm |
| ras max | 0.0591 in1.500 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
